NML:Industries

From GRFSpecs
Jump to navigationJump to search
Props, Vars and CBs

This page contains information on both industry and industry tile properties, variables and callbacks.

Industry properties

Industry properties. Default industry type numbers can be found at default industries.

property value range comment
substitute industry type Number of the original industry type that replaces this one, should it not be available for some reason (e.g. missing NewGRF). This must be the first property to be set, before any other properties or graphics. All properties of the old type are copied to your new industry.
override industry type Number of the original industry type overridden. This will cause other grfs / industries to consider your industry type the same as the old type. Only set this property if your type is (more or less) the same as the old type.
layouts Array of tilelayouts

See Tilelayout syntax.

life_type One of IND_LIFE_TYPE_XXX, XXX = BLACK_HOLE | EXTRACTIVE | ORGANIC | PROCESSING The generic type of industry. This determines the production changes that occur by default (when not using the callback). Examples are respectively power plants, coal mines, forests en steel mills.
closure_msg string

Message displayed when the industry announces closure. Use a custom string or one of the default TTD strings.

prod_increase_msg string

Message displayed when industry increases production. Use a custom string or one of the default TTD strings.

prod_decrease_msg string

Message displayed when industry decreases production. Use a custom string or one of the default TTD strings.

fund_cost_multiplier 0..255 Fund cost multiplier. Note that in OpenTTD the unmodified base cost is 8x higher for building (not prospecting) raw (=extractive / organic, see life_type) industries.
prod_cargo_types array of up to 2 ints Types of cargo produced. Use the cargotype(<label>) built-in function to specify a label from the cargotable.
accept_cargo_types array of up to 3 ints Types of cargo accepted. Use the cargotype(<label>) built-in function to specify a label from the cargotable
prod_multiplier array of up to 2 ints (0..255) Amount of each output cargo to produce every 256 ticks (8 or 9 times a month)
min_cargo_distr 0..255 Minimal amount of cargo before transporting to stations.
random_sound_effects array of ints Sound effect numbers that are played some times.
conflicting_ind_types array of up to 3x industry_type(IND_TYPE_OLD | IND_TYPE_NEW, id)

Three industry types that should not be nearby. Use the builtin function industry_type(..) to define either an old industry (using the global ID) or a new industry from your grf (using the grf-local ID).

prob_random 0..255 Probability of occurring while generating initial industries.
prob_in_game 0..255 Probability of occurring while creating industries during the game.
map_colour 0..255

Colour index from the DOS palette to use on the minimap for this industry.

spec_flags bitmask(flags)

for flag values see Industry special flags

new_ind_msg string Message displayed when industry gets built during game play.
input_multiplier_1 array of up to 2 floats (0..255) Output cargo multiplication factors for getting a unit of the first accepted cargo.
input_multiplier_2 array of up to 2 floats (0..255) Output cargo multiplication factors for getting a unit of the second accepted cargo.
input_multiplier_3 array of up to 2 floats (0..255) Output cargo multiplication factors for getting a unit of the third accepted cargo.
name string

Name of the industry, use a custom string or one of the default TTD strings.

prospect_chance 0 .. 1 (float) Chance of successful prospecting.
callback_flags bitmask(flags)

Do not set this, unless you use old-style callbacks.

remove_cost_multiplier int Cost multiplier for removing the industry (currently only possible with magic bulldozer).
nearby_station_name string Default additional name for a nearby station

Industry special flags

flag meaning
IND_FLAG_PLANT_FIELDS_PERIODICALLY The industry periodically plants fields around itself (temperate and arctic farms)
IND_FLAG_CUT_TREES The industry cuts trees around itself and produces its first output cargo from them (lumber mill)
IND_FLAG_BUILT_ON_WATER The industry is built on water (oil rig)
IND_FLAG_ONLY_IN_LARGE_TOWNS The industry can only be built in towns (i.e. it has to replace houses) with population larger than 1200 (temperate bank)
IND_FLAG_ONLY_IN_TOWNS The industry can only be built in towns (i.e. it has to replace houses) (arctic and tropic banks, water tower)
IND_FLAG_BUILT_NEAR_TOWN The industry is always built near towns (i.e. near town sign; additionally the industry is allowed to replace houses) (toy shop)
IND_FLAG_PLANT_FIELDS_WHEN_BUILT Fields are planted around the industry when it's built (all farms)
IND_FLAG_NO_PRODUCTION_INCREASE The industry cannot increase its production on the temperate climate (oil wells)
IND_FLAG_BUILT_ONLY_BEFORE_1950 The industry is built only before 1950 (oil wells)
IND_FLAG_BUILT_ONLY_AFTER_1960 The industry is built only after 1960 (oil rig)
IND_FLAG_AI_CREATES_AIR_AND_SHIP_ROUTES AI players will attempt to establish air and ship routes going to this industry (oil rig)
IND_FLAG_MILITARY_AIRPLANE_CAN_EXPLODE The industry can be exploded by a military airplane (oil refinery)
IND_FLAG_MILITARY_HELICOPTER_CAN_EXPLODE The industry can be exploded by a military helicopter (factory)
IND_FLAG_CAN_CAUSE_SUBSIDENCE The industry can cause a subsidence (coal mine)
IND_FLAG_AUTOMATIC_PRODUCTION_MULTIPLIER Automatic production multiplier handing (No industry has this bit set by default.).
IND_FLAG_RANDOM_BITS_IN_PRODUCTION_CALLBACK The production callback needs random bits in var. 10 (No industry has this bit set by default.)
IND_FLAG_DO_NOT_FORCE_INSTANCE_AT_MAP_GENERATION Do not force one instance of this type to appear during initial map generation (No industry has this bit set by default.)
IND_FLAG_ALLOW_CLOSING_LAST_INSTANCE Allow closing down the last instance of this type (No industry has this bit set by default.)

Industry tile properties

property value range comment
substitute

0..174

Number of the default industry tile that replaces this one, if this industry tile is not available for some reason. This property must be set first, before any other properties or graphics. All properties of the old type are copied to your new house.
override

0..174

id of the default industry tile which this industry tile replaces. This will cause your industry tile to be placed instead of the default industry tile. This is ignored, if the default industry tile has already been overridden. You can define this property multiple times
accepted_cargos Array with up to 3 [cargo_id, amount]-pairs. The cargos that are accepted by this tile. CargoID is a cargo type from your cargo translation table, amount is the acceptance of the given cargo in 1/8 units.
Example: to make a tile accept both COAL and IORE you could use this: accepted_cargos: [[COAL, 8], [IORE, 8]];
Example: for a tile that doesn't any cargos at all you'd use: accepted_cargos: [];
land_shape_flags

bitmask(Land shape flags)

callback_flags bitmask(INDTILE_CBF_XXX, INDTILE_CBF_YYY)

Do not set this, unless you use old-style callbacks.

animation_info Array [ANIMATION_XXX, frame-count] XXX = [LOOPING | NON_LOOPING], 1..253 frames
animation_speed 0..16

Speed of animation, see animation speed table for the meaning of the values.

animation_triggers bitmask(ANIM_TRIGGER_INDTILE_XXX, ... )

Bitmask of triggers that will trigger the anim_control callback, see the table below.

special_flags bitmask(INDTILE_FLAG_XXX) XXX is a special flag description. Currently there's only one flag defined: set INDTILE_FLAG_RANDOM_ANIMATION if the decision in anim_control callback needs random bits via extra_callback_info1

Land shape flags

Flag Meaning
LSF_CANNOT_LOWER_NW_EDGE North-west edge cannot be lowered
LSF_CANNOT_LOWER_NE_EDGE North-east edge cannot be lowered
LSF_CANNOT_LOWER_SW_EDGE South-west edge cannot be lowered
LSF_CANNOT_LOWER_SE_EDGE South-east edge cannot be lowered
LSF_ONLY_ON_FLAT_LAND This tile can only be built on flat land
LSF_ALLOW_ON_WATER The land/water check is disabled for this tile so it can be built on water. If you need more control over this use callback 0x2F.

Common variables

The following variables are available to both industries and industry tiles. All of them require an x, y offset. For industries, this offset is unsigned and relative to the northernmost tile. For industry tiles, it is signed and relative to the current tile.

name value range comment
nearby_tile_slope SLOPE_XXX

See tile slopes for an overview of possible values

nearby_tile_is_water 1 if the tile is water, 0 otherwise
nearby_tile_terrain_type TILETYPE_XX TILETYPE_NORMAL, TILETYPE_DESERT, TILETYPE_RAIN_FOREST, TILETYPE_SNOW
nearby_tile_water_class WATER_CLASS_XXX XXX = [NONE | SEA | CANAL | RIVER] Note that tiles for which nearby_tile_is_water is 0 may still have a water class, e.g. industry tiles with water beneath them.
nearby_tile_height 0..120 The height of the lowest corner of the given tile.
nearby_tile_class

Tile class

nearby_tile_animation_frame 0..255 Animation frame of the given tile
nearby_tile_industrytile_id 0x00aa, 0xFFbb, 0xFFFE or 0xFFFF 0x00aa: The tile is an industry tile that is part of this GRF, the tile id is aa.
0xFFbb: The tile is an original industry tile with id bb.
0xFFFE: The tile is an industry tile defined in another GRF.
0xFFFF: The tile is not an industry tile or it belongs to another GRF.

Industry variables

name value range comment
production_level 0, or 4 .. 128 Current production level of the industry. Usually in range 4 .. 128, default starting level is 16. A level of 0 indicates imminent closure.
waiting_cargo_1 0..65535 If any of the production callbacks is enabled, this variable will contain the amount of the first cargo type awaiting to be processed.
waiting_cargo_2 0..65535 If any of the production callbacks is enabled, this variable will contain the amount of the second cargo type awaiting to be processed.
waiting_cargo_3 0..65535 If any of the production callbacks is enabled, this variable will contain the amount of the third cargo type awaiting to be processed.
produced_cargo_waiting_1 0..65535 The amount of produced 'output cargo type 1' that this waiting to be transported.
produced_cargo_waiting_2 0..65535 The amount of produced 'output cargo type 2' that this waiting to be transported.
produced_this_month_1 0..65535 The amount of 'output cargo type 1' that was produced this month.
produced_this_month_2 0..65535 The amount of 'output cargo type 2' that was produced this month.
produced_last_month_1 0..65535 The amount of 'output cargo type 1' that was produced last month.
produced_last_month_2 0..65535 The amount of 'output cargo type 2' that was produced last month.
transported_this_month_1 0..65535 The amount of 'output cargo type 1' that was transported this month.
transported_this_month_2 0..65535 The amount of 'output cargo type 2' that was transported this month.
transported_last_month_1 0..65535 The amount of 'output cargo type 1' that was produced last month.
transported_last_month_2 0..65535 The amount of 'output cargo type 2' that was produced last month.
transported_last_month_pct_1 0..100 Percentage of produced 'output cargo type 1' that was transported last month.
transported_last_month_pct_2 0..100 Percentage of produced 'output cargo type 2' that was transported last month.
water_distance Distance to the tile If the industry is built on water, this variable gives the distance of the closest dry land tile, otherwise it gives the distance of the closest water tile.
layout_num 1..255 Number of the layout being used by the industry.
founder 0..16 Company number of the industry founder. It will be FOUNDER_GAME (=16) if the industry was generated randomly. TTDPatch only supports up to 8 companies (0..7).
founder_type PLAYERTYPE_XX PLAYERTYPE_HUMAN, PLAYERTYPE_AI, PLAYERTYPE_HUMAN_IN_AI (human managing AI company) or PLAYERTYPE_AI_IN_HUMAN (AI managing human company). OpenTTD only uses PLAYERTYPE_HUMAN and PLAYERTYPE_AI. If you cheat yourself to be part of an AI company OpenTTD will still report PLAYERTYPE_AI for the company with yourself and the AI and it'll report PLAYERTYPE_HUMAN for the now uncontrolled company.
founder_colour1 COLOUR_XXX

Index of founding company's first colour. 0 if not founded by a company. Refer to the table here for possible values.

founder_colour2 COLOUR_XXX

Index of founding company's second colour. It's the same as company_colour1, if no second company colour is chosen. 0 if not founded by a company. Refer to the table here for possible values.

colour COLOUR_XXX

Random colour for this industry. Refer to the table here for possible values.

build_date 0..1826212865 Date of the industry foundation in days since year 0.
build_type BUILDTYPE_XX BUILDTYPE_UNKNOWN (if created in an old version or with newindustries disabled), BUILDTYPE_GAMEPLAY (if founded or created by the in-game random industry generator), BUILDTYPE_GENERATION (if created during random map generation) or BUILDTYPE_EDITOR (if created with the scenario editor).
counter 0..65535 Decremented every tick, used to time primary industry production in TTD.
last_accept_date date(year, month, day) Date when cargo was accepted for the last time. Not valid before 1920 and after 2090.
random_bits 0 ... 65535 Random data that can be used to randomize certain descisions. (see Random switch) (NML r1666)


Variables that require some parameters.

name arguments comment
industry_count industry_type, grfid = -1

The value of this variable is the number of industries of a given type that are currently on the map. industry_type is either the ID of an industry. GRFid is the grf in which the industry was defined. The default value is -1, which means current newgrf. A grfid of 0 lets you check the number of default industries of a given type. Use the builtin function str2number() to convert a grfid to its numeric representation.
Warning: using this variable trashes the contents of temporary storage register 0x100

industry_distance industry_type, grfid = -1 The value of this variable is the manhattan distance the closest instance of the given industry or 0xFFFF if not applicable. See industry_count for a description of the parameters.
Warning: using this variable trashes the contents of temporary storage register 0x100.
industry_layout_count / industry_layout_distance industry_type, layout, grfid = -1. See industry_count / industry_distance for description of industry_type, grfid and return value. The results are filtered to industries that have the given layout number.
Warning: using this variable trashes the contents of temporary storage registers 0x100 and 0x101.
industry_town_count industry_type, grfid = -1. See industry_count / industry_distance for description of industry_type, grfid and return value. The results are filtered to industries that have the same town than the current industry.
Warning: using this variable trashes the contents of temporary storage registers 0x100 and 0x101.
town_manhattan_dist x, y Parameters indicate a signed offset relative to the northern tile. Returns the Manhattan distance (dx + dy) from the selected tile to the closest town
town_euclidean_dist x, y Parameters indicate a signed offset relative to the northern tile. Returns the squared Eucleidean distance (dx^2 + dy^2) from the selected tile to the closest town.
town_zone x, y

Parameters indicate a signed offset relative to the northern tile. Returns the town zone that the selected tile is in.

nearby_tile_random_bits x, y Parameters indicate an unsigned offset relative to the northern tile. Returns the random bits of the selected industry tile, or 0 if it is not an industry tile that's part of this industry.

Industry tile variables

name value range comment
construction_state 0..3 Current construction state of the industry tile.
terrain_type TILETYPE_XX TILETYPE_NORMAL, TILETYPE_DESERT, TILETYPE_RAIN_FOREST, TILETYPE_SNOW
town_zone

town zone

The town zone of the current tile.
relative_x 0..255 X-coordinate (top right -> bottom left) of the tile relative to the northernmost tile.
relative_y 0..255 Y-coordinate (top left -> bottom right) of the tile relative to the northernmost tile.
relative_pos 0xYYXX

A combination of relative_x and relative_y in the format 0xYYXX. Useful if you want to check for a single position. The builtin function relative_coord(x, y) may be useful when making comparisons.

animation_frame 0..255 Current animation frame.


Industry tiles have access to the common variables described above. Additionally, they have access to the following:

name arguments comment
nearby_tile_is_same_industry x, y Parameters indicate a signed tile offset relative to the current tile. Returns 1 if the tile is part of the same industry, 0 otherwise

Industry callbacks

callback return value comment
default varies Any unhandled callbacks. Generally this doesn't need to be used, except for old-style callbacks.
produce_cargo_arrival Produce-block Called to produce cargo when it arrives.
produce_256_ticks Produce-block Called to produce cargo every 256 ticks.
availability CB_RESULT_IND_ALLOW or CB_RESULT_IND_DISALLOW

NML 0.2 Only available in NML 0.2 or earlier. Called when the game needs to know if the industry type is available. It is limited to the type as a whole, so you can't access industry-specific variables. extra_callback_info2 contains the creation type.

construction_probability CB_RESULT_IND_NO_CONSTRUCTION, CB_RESULT_IND_PROBABILITY_FROM_PROPERTY or a relative probability 0..255

NML 0.3. Called when the game needs to know if the industry type is available. It is limited to the type as a whole, so you can't access industry-specific variables. extra_callback_info2 contains the creation type. If you return CB_RESULT_IND_NO_CONSTRUCTION or 0 the industry won't be build. If you return CB_RESULT_IND_PROBABILITY_FROM_PROPERTY it'll be build according to the relative probability as defined in the prob_random or prob_in_game properties, otherwise it'll use the value as returned as relative probability.

location_check

See the table below.

Called to check if a location is suitable. extra_callback_info2 contains the creation type. Since the industry isn't built yet, industry variables aren't available. If this callback is not implemented or fails, constructing the industry will be allowed. Construction might also be prevented via the tile_check industry tile callback, though.

monthly_prod_change

See below

Called each month to (possibly) change the industry production. extra_callback_info2 contains random bits.
random_prod_change

See below

Works exactly the same as monthly_prod_change, except that it's only called when TTD selects this industry for a random production change.
build_prod_change Value in range 4-128 Called when an industry is constructed. Return value is production level (default 16). Can also be used to initialise permanent storage when an industry is constructed. Requires OpenTTD > r24186 and nml > 1886.
cargo_subtype_display String or CB_RESULT_NO_TEXT This callback allows displaying some text after a cargo name. Returning CB_RESULT_NO_TEXT displays nothing. The lowest byte of extra_callback_info2 contains 0 .. 2 to get texts for the first .. third accepted cargo type, and 3 .. 4 for the first ... second produced cargo type. The second byte contains 0 when getting a string for the buy menu (no industry variables available!), 1 when for the industry window and 2 for the industry directory window.
extra_text_industry String Show extra text in the industry window.
extra_text_fund String Show extra text in the fund window. Since the industry isn't built, no industry variables are available.
control_special 0 or 1 Called to control various effects from the spec_flags property. Currently only works for the first two (plant fields / cut trees). Return 1 to execute the action or 0 to not do so. The relevant flag is given in extra_callback_info2. The default (if the flag is enabled, of course) is to plant fields with 1/8th chance every 256 ticks, and to cut trees every 512 ticks. Random bits are supplied in extra_callback_info1.
stop_accept_cargo 0 or 1 With this callback, you can temporarily refuse accepting a certain cargo, for example because the stockpile is full. Return 1 to accept or 0 to refuse. Make sure to synchronize this callback with the cargo_amount_accept callback for industry tiles. extra_callback_info2 contains the cargo type to accept or not.
colour COLOUR_XXX Called after constructing the industry. The colour variable is set to a random value at this point, you can use this callback to change this.
cargo_input Cargo type, or 0xFF Decide the input cargo types. Called repeatedly until 0xFF is returned, although currently not more than three times. Do not rely on this limitation, though. extra_callback_info1 starts at 0 and is incremented for every iteration. Return a cargo type (from the table) or 0xFF to stop.
cargo_output Cargo type, or 0xFF Same as cargo_input above, except that it is applied to the output cargo types and currently not called more than twice.

Location check results

The following values can be used as return values for the location_check callback for industries and the tile_check callback for industry tiles and objects.

return value meaning
string(..) Item can't be built, show the string as error message.
CB_RESULT_LOCATION_ALLOW Item can be built.
CB_RESULT_LOCATION_DISALLOW Item can't be built, display the default error message. This is "site unsuitable" for industries and industry tiles, and "land sloped in wrong direction" for objects.
CB_RESULT_LOCATION_DISALLOW_ONLY_RAINFOREST Item can't be built, display the "...can only be built in rainforest areas" error message.
CB_RESULT_LOCATION_DISALLOW_ONLY_DESERT Item can't be built, display the "...can only be built in desert areas" error message.
CB_RESULT_LOCATION_DISALLOW_ONLY_ABOVE_SNOWLINE Item can't be built, display the "...can only be built above the snow-line" error message.
CB_RESULT_LOCATION_DISALLOW_ONLY_BELOW_SNOWLINE Item can't be built, display the "...can only be built below the snow-line" error message.
CB_RESULT_LOCATION_DISALLOW_NOT_ON_OPEN_SEA Item can't be built, display the "...can't build on open sea" error message.
CB_RESULT_LOCATION_DISALLOW_NOT_ON_CANAL Item can't be built, display the "...can't build on canal" error message
CB_RESULT_LOCATION_DISALLOW_NOT_ON_RIVER Item can't be built, display the "...can't build on river" error message.

Production change callback results

value meaning
CB_RESULT_IND_PROD_NO_CHANGE Do not change industry production
CB_RESULT_IND_PROD_HALF Half industry production. If production goes below a quarter of default, the industry closes.
CB_RESULT_IND_PROD_DOUBLE Double production if it's not 8x default yet.
CB_RESULT_IND_PROD_CLOSE Announce closure and remove the industry next month.
CB_RESULT_IND_PROD_RANDOM Do a random production change, as if the industry is a primary one.
CB_RESULT_IND_PROD_DIVIDE_BY_4 Divide production by 4
CB_RESULT_IND_PROD_DIVIDE_BY_8 Divide production by 8
CB_RESULT_IND_PROD_DIVIDE_BY_16 Divide production by 16
CB_RESULT_IND_PROD_DIVIDE_BY_32 Divide production by 32
CB_RESULT_IND_PROD_MULTIPLY_BY_4 Multiply production by 4
CB_RESULT_IND_PROD_MULTIPLY_BY_8 Multiply production by 8
CB_RESULT_IND_PROD_MULTIPLY_BY_16 Multiply production by 16
CB_RESULT_IND_PROD_MULTIPLY_BY_32 Multiply production by 32
CB_RESULT_IND_PROD_DECREMENT_BY_1 Decrement production by 1
CB_RESULT_IND_PROD_INCREMENT_BY_1 Increment production by 1
CB_RESULT_IND_PROD_SET_BY_0x100 Set the production level to the value in bits 16 .. 23 of register 0x100.

Setting bit 7 of the result disables the associated news message.
Setting bit 8 replaces the news message with a custom message, read from register 0x100 bits 0 .. 15.

Industry creation types

value meaning
IND_CREATION_GENERATION Industry is created during map generation, or when building 'many random industries' in the scenario editor.
IND_CREATION_RANDOM Industry is randomly generated during gameplay
IND_CREATION_FUND Industry is funded by the player (in game or scenario editor)
IND_CREATION_PROSPECT Industry is prospected by the player

Industry tile callbacks

callback return value comment
default Sprite layout Graphics for the industry tile
random_trigger N/A

See random switch for more information.

anim_next_frame Next animation frame or CB_RESULT_XXX Called for every animation frame, returns the next frame to display. Alternatively, return CB_RESULT_NEXT_FRAME or CB_RESULT_STOP_ANIMATION to show the next frame or stop animation, respectively. extra_callback_info1 contains random bits, if enabled in the special_flags property. Returning a sound effect in the high byte will cause that sound effect to be played.
anim_control Next animation frame or CB_RESULT_XXX

Called whenever an animation trigger happens. Return the animation frame to show, or CB_RESULT_XXX with XXX = [CB_RESULT_START_ANIMATION | STOP_ANIMATION | DO_NOTHING] to respectively start the animation in its current frame, stop the animation or do nothing. extra_callback_info1 contains random bits, if enabled in the special_flags property. Returning a sound effect in the high byte will cause that sound effect to be played. extra_callback_info2 contains the reason to trigger the animation, see the table below. Note that you need to enable the wanted triggers in the animation_triggers property.

anim_speed 0 .. 16 Decide the time an animation frame should last. Return value is interpreted as (num_ticks = 2^anim_speed), which each tick lasting 30 ms. Avoid using this callback if possible, since it has to be called each tick for every animated tile. This can be used to create animation frames that last between 30 ms and 33 minutes.
cargo_type_accept type1 + (type2 << 5) + (type3 << 10) Decide the cargo types that this tile accepts. If this callback is not implemented or fails, the values from accepted_cargos are used instead. Bits 0..4: First cargo type. Bits 5..9: Second cargo type. Bits 10..14: Third cargo type.
cargo_amount_accept amt1 + (amt2 << 4) + (amt3 << 8) Acceptance for each cargo amount in 1/8th. If this callback is not implemented or fails, the values from accepted_cargos are used instead. Cargo types are from the cargo_type_accept callback, or the accepted_cargos property if that callback failed. Bits 0..3: Acceptance of first cargo type. Bits 4..7: Acceptance of second cargo type. Bits 8..11: Acceptance of third cargo type.
tile_check

Same as for the location_check industry callback

Called before constructing the industry, so nothing exists on the map yet. Since the industry isn't built yet, so you can't access industry variables. From the tile variables, relative x/y/position, town zone are available, as well as the class, height, slope, terrain type and water status of nearby tiles. extra_callback_info2 contains the industry layout number in the lowest (first) byte and the creation type in the second byte. If this callback is not implemented or fails, the land_shape_flags property will be used instead to determine if the slope is suitable. This also means that without this callback, the tile may not be built on steep slopes.

foundations CB_RESULT[_NO]_FOUNDATIONS Return CB_RESULT_FOUNDATIONS to draw standard foundations (default) or CB_RESULT_NO_FOUNDATIONS to not draw them.
autoslope CB_RESULT[_NO]_AUTOSLOPE Return CB_RESULT_AUTOSLOPE to allow autoslope (altering the ground below a tile) or CB_RESULT_NO_AUTOSLOPE to disallow it.

Animation triggers

Trigger Meaning
ANIM_TRIGGER_INDTILE_CONSTRUCTION_STATE the construction state changes
ANIM_TRIGGER_INDTILE_TILE_LOOP the tile is processed in the periodic processing loop
ANIM_TRIGGER_INDTILE_INDUSTRY_LOOP the industry of the tile is processed in the periodic processing loop (synchronized for all tiles)
ANIM_TRIGGER_INDTILE_RECEIVED_CARGO the industry of the tile receives input cargo from a station (synchronized for all tiles)
ANIM_TRIGGER_INDTILE_DISTRIBUTES_CARGO the industry distributes its output cargo to one of the stations nearby (synchronized for all tiles)
Retrieved from ‘https://newgrf-specs.tt-wiki.net/index.php?title=NML:Industries&oldid=3182’