NML:Objects
Vehicles, Stations, Canals, Bridges, Towns, Houses, Industries (Tiles), Cargos, Airports+Tiles, Objects, Railtypes, Roadtypes, Tramtypes, Terrain
- common props | vars | CBs
- train | roadveh | ship | aircr props
- common variables
- industry props | vars | CBs
- tile props | vars | CBs
- airport props | vars | CBs
- tile props | vars | CBs
Object properties
| property | value range | comment |
|---|---|---|
| class | String literal of length 4 |
Unlike station classes, there is currently no default yet. You have to set the class ID before any other property or graphics. Characters allowed in the IDs are A-Z, 0-9. While you are technically free to chose your own class, it's highly recommended you stick to one of the default classes. |
| classname | string | You only need to set this for one object in every class. |
| name | string | |
| climates_available | bitmask(CLIMATE_XXX, CLIMATE_YYY, ...) | ARCTIC | TROPICAL | TOYLAND], alternatively NO_CLIMATE or ALL_CLIMATES |
| size | [x, y] | Size in x and y direction. Both x and y must be compiletime constants |
| build_cost_multiplier | multiplicator to the base purchase cost | |
| remove_cost_multiplier | multiplicator to the base removal cost | |
| introduction_date | date | The date this object becomes available to build. |
| end_of_life_date | date | The last date this object is buildable. Must be at least 365 days after introduction_date |
| object_flags | bitmask(OBJ_FLAG_XXX, OBJ_FLAG_YYY) | |
| animation_info | Array [ANIMATION_XXX, frame-count] | NON_LOOPING], 1..253 frames |
| animation_speed | 0..16 |
Speed of animation, see animation speed table for the meaning of the values. |
| animation_triggers | ||
| callback_flags | bitmask(OBJ_CBF_XXX, OBJ_CBF_YYY) |
Do not set this, unless you use old-style callbacks. |
| height | 0..255 | Height of the object / 8. For example if your object is 16 pixels height you should set height to 2. In OpenTTD this property is used to determine the height of the build object window; the height for the object preview is set to 32 + "value of property" * 8. The property is also used to determine how high a bridge must be if it is allowed by the bit in object_flags. |
| num_views | 1, 2 or 4 | Objects may have "views", i.e. different graphical representations, e.g. used to show rotated views of an object. Number of views may be 1, 2, or 4. Default value is 1. For non-square objects, x and y sizes are swapped for odd views. Use variable view to determine the view of a built object.
|
Default object classes
Please refer to the list of object labels in the NewGRF Specs. The default class names listed there are recommended, you still need to set the class name for at least one object in every class or you risk to end up with objects in a class without a name. If multiple NewGRFs define objects for the same class the name defined in the last NewGRF will be used.
List of object flags
| Name | Meaning |
|---|---|
| OBJ_FLAG_ONLY_SE | Only available in the scenario editor (incompatible with OBJ_FLAG_ONLY_INGAME) |
| OBJ_FLAG_IRREMOVABLE | Object cannot be removed with the normal dynamite tool. In OpenTTD you can only remove the object with the magic bulldozer cheat, in TTDPatch you can remove it by holding ctrl while using the bulldozer tool. The cost of removing this object is multiplied by 25. |
| OBJ_FLAG_ANYTHING_REMOVE | Anything can remove this object (owned land behavior) |
| OBJ_FLAG_ON_WATER | Allow construction of the object on water |
| OBJ_FLAG_REMOVE_IS_INCOME | Removal cost is actually income (owned land behaviour) |
| OBJ_FLAG_NO_FOUNDATIONS | Do not display foundations if on a slope |
| OBJ_FLAG_ANIMATED | Setting this flag will allow the object's animation counter to be increased, must be set if you plan to make use of animations. |
| OBJ_FLAG_ONLY_INGAME | Only available during game play (incompatible with OBJ_FLAG_ONLY_SE) |
| OBJ_FLAG_2CC | Allows 2cc mapping for objects instead of the default 1cc |
| OBJ_FLAG_NOT_ON_LAND | Disallows construction on land (implies OBJ_FLAG_ON_WATER) |
| OBJ_FLAG_DRAW_WATER | Draws the water under the object. Only applies when built on top of a water tile, also replaces the ground tile of the object completely. Does not work when object built on sloped water tiles. |
| OBJ_FLAG_ALLOW_BRIDGE | Allow bridge over the object taking the building height into account. |
| OBJ_FLAG_RANDOM_ANIMATION | Random bits in the "next animation frame" callback |
Object variables
| name | value range | comment |
|---|---|---|
| relative_x | 0..255 | X-coordinate (top right -> bottom left) of the tile relative to the northernmost tile. |
| relative_y | 0..255 | Y-coordinate (top left -> bottom right) of the tile relative to the northernmost tile. |
| relative_pos | 0xYYXX |
A combination of relative_x and relative_y in the format 0xYYXX. Useful if you want to check for a single position. The builtin function relative_coord(x, y) may be useful when making comparisons. |
| terrain_type | TILETYPE_NORMAL, TILETYPE_DESERT, TILETYPE_RAIN_FOREST, TILETYPE_SNOW | |
| tile_slope | SLOPE_XXX |
See tile slopes for an overview of possible values |
| build_date | The date this object was build. | |
| animation_frame | 0..255 | Current animation frame |
| company_colour | COLOUR_XXX |
Colour used for the company colour mask. Refer to the table here for possible values. |
| owner | 0..0x10 | CompanyID of the owner of the object or 0x10 if it was build in the scenario editor |
| town_manhattan_dist | Manhattan distance to the nearest town | |
| town_euclidean_dist | Euclidean distance to the nearest town | |
| town_zone | The town zone of the current tile. The town zone from the closest town (measured in manhattan distance) is used. | |
| view | 0 .. num_views - 1
|
|
Variables that require one or more parameters:
| name | arguments | value range | comment |
|---|---|---|---|
| nearby_tile_object_type | x, y offset (-8..7) | ID of the object on a nearby tile, if defined by the same grf. OBJECT_TYPE_OTHER_GRF if the object is defined by a different grf (or none at all). OBJECT_TYPE_NO_OBJECT if the tile does not contain an object. | |
| nearby_tile_random_bits | x, y offset (-8..7) | Random bits of the given tile | |
| nearby_tile_slope | x, y offset (-8..7) | See tile_slope | |
| nearby_tile_is_same_object | x, y offset (-8..7) | 0 .. 1 | Is the given tile part of the same object? |
| nearby_tile_is_water | x, y offset (-8..7) | 0 .. 1 | Is the given tile a water tile? |
| nearby_tile_terrain_type | x, y offset (-8..7) | See terrain_type | |
| nearby_tile_water_class | x, y offset (-8..7) | WATER_CLASS_XXX | SEA | CANAL | RIVER] Note that tiles for which nearby_tile_is_water is 0 may still have a water class, e.g. industry tiles with water beneath them.
|
| nearby_tile_height | x, y offset (-8..7) | 0 .. 120 | The minimum height of the given tile. 8 units correspond to one height level |
| nearby_tile_class | x, y offset (-8..7) | ||
| nearby_tile_animation_frame | x, y offset (-8..7) | See animation_frame | |
| object_count | object id [, grfid] | 0..0xFFFF |
Number of objects with the given object id currently on the map. Grfid is the grfid of the newgrf you want to check the object count of (default is current grf). Use the builtin function |
| object_distance | object id [, grfid] | 0..0xFFFF |
Manhattan distance to the closest object of the given type. Grfid is the grfid of the newgrf you want to check the minimum object distance of (default is current grf). Use the builtin function |
Object callbacks
| callback | return value | comment |
|---|---|---|
| default | Sprite layout | Normal graphics for an object placed on the map |
| purchase* | Sprite layout | Graphics shown in the build menu |
| anim_next_frame | Next animation frame or CB_RESULT_XXX | Called for every animation frame, returns the next frame to display. Alternatively, return CB_RESULT_NEXT_FRAME or CB_RESULT_STOP_ANIMATION to show the next frame or stop animation, respectively. extra_callback_info1 contains random bits if the object flag OBJ_FLAG_RANDOM_ANIMATION is set. Returning a sound effect in the high byte will cause that sound effect to be played.
|
| anim_control | Next animation frame or CB_RESULT_XXX |
Called whenever an object animation trigger happens. Return the animation frame to show, or CB_RESULT_XXX with XXX = [CB_RESULT_START_ANIMATION | STOP_ANIMATION | DO_NOTHING] to respectively start the animation in its current frame, stop the animation or do nothing. |
| anim_speed | 0 .. 16 | Decide the time an animation frame should last. Return value is interpreted as (num_ticks = 2^anim_speed), which each tick lasting 30 ms. Avoid using this callback if possible, since it has to be called each tick for every animated tile. This can be used to create animation frames that last between 30 ms and 33 minutes. |
| colour | colour2*16 + colour1 |
Called once, just after construction. Variable |
| autoslope | CB_RESULT[_NO]_AUTOSLOPE | Return CB_RESULT_AUTOSLOPE to allow autoslope (altering the ground below a tile) or CB_RESULT_NO_AUTOSLOPE to disallow it. |
| tile_check* | 0 or 1 | Return 0 to allow construction or 1 to disallow. Parameters: extra_callback_info1 contains the slope in bits 0..3 (see below), all other bits are reserved and should be and-masked out. extra_callback_info2 contains the location of the tile within the object as 16*y + x. Note: NFO allows more specific error messages, NML does not yet support this.
|
| additional_text* | String | Additional text to show in the purchase menu |
* These callbacks are called when the object is not yet built, so object- specific variables cannot be accessed. Trying to do so will result in undefined behaviour.
Animation triggers
| Animation trigger | Description |
|---|---|
| ANIM_TRIGGER_OBJ_BUILT | Object is built (all tiles at the same time) |
| ANIM_TRIGGER_OBJ_TILELOOP | Object tile is processed in the tileloop (at different times for different tiles) |
| ANIM_TRIGGER_OBJ_256_TICKS | Every 256 ticks (all tiles at the same time) |
