NML:Stations

NewGRF Meta Language

Preface

Getting started

Graphics files

Blocks

Units

Expressions

Elementary values

Builtin functions

Language files

Lists of props, vars and CBs

Warnings

Additional references

NewGRF compatibility

Deprecated syntax

Changes from NML 0.2 to 0.3

Changes from NML 0.3 to 0.4

Changes from NML 0.4 to 0.5

Vehicles, Stations, Canals, Bridges, Towns, Houses, Industries (Tiles), Cargos, Airports+Tiles, Objects, Railtypes, Roadtypes, Tramtypes, Terrain

NML Tutorial

Props, Vars and CBs

General

• variables

Vehicles

• common props | vars | CBs
• train | roadveh | ship | aircr props

Stations

• properties | variables | callbacks

Canals

• properties | variables | callbacks

Bridges

• properties | variables | callbacks

Towns

Houses

• properties | variables | callbacks

Industries

• common variables
• industry props | vars | CBs
• tile props | vars | CBs

Cargos

• properties | variables | callbacks

Airports

• airport props | vars | CBs
• tile props | vars | CBs

Objects

• properties | variables | callbacks

Railtypes

• properties | variables | callbacks

Roadtypes

• properties | variables | callbacks

Tramtypes

• properties | variables | callbacks

Stations are supported since NML 0.7.

Station properties

property	value range	comment
class	String literal of length 4	Must be set
classname	string	You only need to set this for one station in every class.
name	string
disabled_platforms disabled_length	bitmask(1, 2, 3, 4, 5, 6, 7, 8)	Restricts the possible number-of-platforms and platform-lengths the player can build as one section. Sizes 1 to 7 can be disabled individually, "size 8" is used for anything bigger than 7. To put restrictions on sizes bigger than 7 (for example, only allow even sizes), you can use callback tile_check. Note: Players can remove single tiles from any station, so stations sections can end up with forbidden sizes anyway.
cargo_threshold	0..65535
draw_pylon_tiles hide_wire_tiles non_traversable_tiles	bitmask(0, 1, 2, 3, 4, 5, 6, 7)
cargo_random_triggers	Array of cargo labels from the cargotable
general_flags	bitmask(STAT_FLAG_XXX, STAT_FLAG_YYY, ...)	STAT_FLAG_DISTRIBUTED_CARGO STAT_FLAG_RANDOM_ANIMATION STAT_FLAG_CUSTOM_FOUNDATIONS STAT_FLAG_EXTENDED_FOUNDATIONS
animation_info	Array [ANIMATION_XXX, frame-count]	XXX = [LOOPING | NON_LOOPING], 1..253 frames
animation_speed	0..16	Speed of animation, see animation speed table for the meaning of the values.
animation_triggers	bitmask(STAT_ANIM_XXX, STAT_ANIM_YYY, ...)	STAT_ANIM_IS_BUILT STAT_ANIM_CARGO_ARRIVES STAT_ANIM_CARGO_REMOVED STAT_ANIM_TRAIN_ENTERS STAT_ANIM_TRAIN_LEAVES STAT_ANIM_TRAIN_LOAD_UNLOAD STAT_ANIM_256_TICKS

Station variables

Base station variables

The following variables are shared between stations and airports:

name	value range	comment
random_bits_station	0..65535	16 random bits, shared between all station sections (rail station sections, airports, ...)
had_vehicle_of_type	bitmask(HAD_VEHICLE_OF_TYPE_XXX, ...)	Bitmask of vehicle types that have visited the station. XXX = [TRAIN | BUS | TRUCK | AIRCRAFT | SHIP].
is_waypoint	[0 | 1]	Whether the station is a waypoint
facilities	bitmask(FACILITY_XXX, ...)	Bitmask of facilities associated with the station. XXX = [TRAIN | TRUCK_STOP | BUS_STOP | AIRPORT | DOCK].
airport_type	AIRPORTTYPE_XXX	Type of airport, contains a bogus value if the station has no airport. XXX = [SMALL | LARGE | HELIPORT | OILRIG].
build_date	date(yyyy,mm,dd)	Date when the station was built. Is clamped to the 1920-2099 range.

The following variables are also shared with airports. They all require a single argument: a cargo type from your cargo translation table.

name	value range	comment
cargo_amount_waiting	0..32767	Units of cargo of waiting
cargo_rating	0..100	Rating for this cargo type (in %)
cargo_time_since_pickup	0..255	Time since the cargo was last picked up. 1 unit equals 185 ticks, or about 2.5 game days.
cargo_time_en_route	0..255	Time this cargo has spent en-route. 1 unit equals 185 ticks, or about 2.5 game days.
cargo_last_vehicle_speed	0..255	Speed of the last vehicle picking up this cargo type. The unit depends on the type of vehicle. For trains and road vehicles, one unit is 1 km/h; for ships, it's 0.5 km/h; for aircraft, it's 8 mph. If the max. speed is above 255 speed units, 255 is used instead. 0 if no vehicle as picked up the cargo type yet.
cargo_last_vehicle_age	0..255	Age of the last vehicle picking up this cargo type, in years. 255 if no vehicle has picked up the cargo type yet.
cargo_accepted	[0 | 1]	1 if this cargo type is currently being accepted at the station, 0 otherwise.
cargo_accepted_ever	[0 | 1]	1 if this cargo type has ever been accepted at the station, 0 otherwise.
cargo_accepted_last_month	[0 | 1]	1 if this cargo type was accepted last month at the station, 0 otherwise.
cargo_accepted_this_month	[0 | 1]	1 if this cargo type was accepted this month at the station, 0 otherwise.
cargo_accepted_bigtick	[0 | 1]	1 if this cargo type was accepted at the station since the last periodic processing, which happens every 250 ticks. 0 otherwise.

Variables without a parameter

name	value range	comment
tile_type	0..7	The type of tile, as decided by select_tile_type.
terrain_type	TILETYPE_XX	TILETYPE_NORMAL, TILETYPE_DESERT, TILETYPE_RAIN_FOREST, TILETYPE_SNOW
track_type	Entry from railtype translation table
company_num	0 ... 14	company number of the vehicle owner. TTDPatch only supports up to 8 companies (0 ... 7)
company_type	PLAYERTYPE_XX	PLAYERTYPE_HUMAN human player PLAYERTYPE_AI AI player PLAYERTYPE_HUMAN_IN_AI human managing AI company PLAYERTYPE_AI_IN_HUMAN AI managing human company OpenTTD only uses PLAYERTYPE_HUMAN and PLAYERTYPE_AI. If you cheat yourself to be part of an AI company OpenTTD will still report PLAYERTYPE_AI for the company with yourself and the AI and it'll report PLAYERTYPE_HUMAN for the now uncontrolled company.
company_colour1	COLOUR_XXX	Refer to the table here for possible values.
company_colour2	COLOUR_XXX	Same as company_colour1, if no 2nd company colour is chosen. Refer to the table here for possible values.
pbs_reserved	[0 | 1]	1 if the tile has been reserved by a train for PBS (Path-based signalling) purposes, 0 otherwise.
pbs_reserved_or_disabled	[0 | 1]	1 if the tile has been reserved by a train for PBS (Path-based signalling) purposes, or if PBS is not enabled. Currently PBS is always considered enabled if the game version used supports it, but in the future, this may change to check if the current signal block actually uses PBS-signals.
pbs_enabled	[0 | 1]	1 if PBS is enabled. Currently PBS is always considered enabled if the game version used supports it, but in the future, this may change to check if the current signal block actually uses PBS-signals.
rail_continuation	bitmask(0, ... 7)	see below
rail_present	bitmask(0, ... 7)	see below
animation_frame	0..255	Animation frame of the current tile.
random_bits_tile	0..15	4 random bits, specific to this station tile.

Rail continuation

Variables rail_continuation and rail_present both contain a bitmask, with 8 possible bits set. Each bit corresponds to one of the adjacent tiles, refer to the table or picture below. The bit in rail_present is set if the tile contains any rail track. Bits 0..3 in rail_continuation are only set if there is rail track on the tile and if that track connects to the current tile (note that this tile has no connection to the tiles corresponding to bits 2 and 3, but that doesn't matter). Bits 4..7 in rail_continuation are set if there is track on the tile and if that track connects to tile 2 or 3, whichever is applicable.

Bit	Set if rail continues in direction of...
0	+Length
1	-Length
2	+Platforms
3	-Platforms
4	+Length, +Platforms
5	-Length, +Platforms
6	+Length, -Platforms
7	-Length, -Platforms

The following picture illustrates which bits represent which tile for the two possible station orientations:

Variables that require one or more arguments

name	arguments	value range	comment
nearby_tile_slope	tile- and platform-offset	SLOPE_XXX	See tile slopes for an overview of possible values. Note that the slope is 'mirrored' in the NW-SE orientation, i.e. the bits for CORNER_W and CORNER_E are swapped.
nearby_tile_is_water	tile- and platform-offset	[0 | 1]	1 if the tile is water, 0 otherwise
nearby_tile_terrain_type	tile- and platform-offset	TILETYPE_XX	TILETYPE_NORMAL, TILETYPE_DESERT, TILETYPE_RAIN_FOREST, TILETYPE_SNOW
nearby_tile_water_class	tile- and platform-offset	WATER_CLASS_XXX	XXX = [NONE | SEA | CANAL | RIVER] Note that tiles for which nearby_tile_is_water is 0 may still have a water class, e.g. industry tiles with water beneath them.
nearby_tile_height	tile- and platform-offset	0..255 (currently limited to 0..15)	Height of the lowest corner of the tile. 1 unit is one height level of 8 pixels.
nearby_tile_class	tile- and platform-offset	Tile class
nearby_tile_animation_frame	tile- and platform-offset	0..255	Animation frame of the given tile
nearby_tile_is_station	tile- and platform-offset	[0 | 1]	1 if the given tile is a station tile, 0 otherwise
nearby_tile_station_id	tile- and platform-offset	0..255	If the given tile is a station tile defined by this NewGRF, the item ID. Else, the content is undefined.
nearby_tile_same_grf	tile- and platform-offset	[0 | 1]	1 if the given tile is a station tile defined by this NewGRF, 0 otherwise.
nearby_tile_other_grf	tile- and platform-offset	[0 | 1]	1 if the given tile is a station tile defined by a different NewGRF, 0 otherwise.
nearby_tile_grfid	tile- and platform-offset	32-bit GRFID	GRFID of the NewGRF defining the given station tile.
nearby_tile_original_gfx	tile- and platform-offset	[0 | 1]	1 if the given tile is a station tile with original graphics, 0 otherwise.
nearby_tile_same_station	tile- and platform-offset	[0 | 1]	1 if the given tile is part of the same station, 0 otherwise. Undefined if the tile is not a station tile.
nearby_tile_perpendicular	tile- and platform-offset	[0 | 1]	1 if the given tile a station tile aligned perpendicular to this tile, 0 if it is aligned parallel. Undefined if the tile is not a station tile.
nearby_tile_platform_type	tile- and platform-offset	0..3	Platform type of the given tile. Value is undefined if the tile is not a station tile, else possible values are: 0 plain platform 1 platform with building 2 platform with roof, left side 3 platform with roof, right side
platform_length	PLATFROM_SAME_XXX	0..15	Length of the platform (along the platform direction) in tiles
platform_count	PLATFORM_SAME_XXX	0..15	Number of platforms (counted perpendicular to the platform direction)
platform_position_from_start	PLATFORM_SAME_XXX	0..15	Position along the platform, 0 for the first (northernmost) tile.
platform_position_from_end	PLATFORM_SAME_XXX	0..15	Position along the platform, 0 for the last (southernmost) tile.
platform_position_from_middle	PLATFORM_SAME_XXX	-8..7	Position along the platform, 0 for the middle tile. When the number of tiles is even, the southernmost of the two middle tiles is assigned number 0, so there is one more negative than positive number. Using PLATFORM_SAME_DIRECTION is not possible here.
platform_number_from_start	PLATFORM_SAME_XXX	0..15	Platform number, counting from top to bottom, so 0 for the northernmost platform.
platform_number_from_end	PLATFORM_SAME_XXX	0..15	Platform number, counting from bottom to top, so 0 for the southernmost platform.
platform_number_from_middle	PLATFORM_SAME_XXX	-8..7	Platform number, counting top to bottom, using 0 for the middle platform. When the number of platforms is even, the southernmost of the two middle platformsis assigned number 0, so there is one more negative than positive number. Using PLATFORM_SAME_DIRECTION is not possible here.

Station callbacks

The following table contains a list of available station callbacks.

Additionally, it's possible to provide cargo-specific graphics, using the identifier from the cargo table as callback name. These callbacks will be used if the cargo is waiting at the station. If multiple cargo types are waiting at the station, OpenTTD will pick one of the options the station provides. If none of the listed cargo types is waiting at the station, the default callback will be used.

Cargo-specific graphics callbacks are never called from the purchase menu, refer to the purchase callback below instead.

Note that the above affects graphics only, other callbacks are unaffected.

callback	return value	comment
default	sprite group
purchase	sprite group
custom_spritesets
sprite_layouts
select_sprite_layout
purchase_select_sprite_layout
prepare_layout
purchase_prepare_layout
foundations
availability	[0 | 1]	Return 1 to make the station show up in the build window
tile_check
select_tile_type
anim_next_frame	Next animation frame or CB_RESULT_XXX	Called for every animation frame, returns the next frame to display. Alternatively, return CB_RESULT_NEXT_FRAME or CB_RESULT_STOP_ANIMATION to show the next frame or stop animation, respectively. extra_callback_info1: 32 random bits, if enabled in the general_flags property. Returning a sound effect in the high byte will cause that sound effect to be played.
anim_control	Next animation frame or CB_RESULT_XXX	Called whenever an animation trigger happens. Return the animation frame to show, or CB_RESULT_XXX with XXX = [CB_RESULT_START_ANIMATION | STOP_ANIMATION | DO_NOTHING] to respectively start the animation in its current frame, stop the animation or do nothing. Returning a sound effect in the high byte will cause that sound effect to be played. extra_callback_info1: 32 random bits. The low 16 bits are always different for each station tile, but the high 16 bits are the same for all triggered tiles. getbits(extra_callback_info2, 0, 8): Reason for the callback trigger (STAT_ANIM_xxx). Note that you need to enable the wanted triggers in the animation_triggers property.
anim_speed	0 .. 16	Decide the time an animation frame should last. Return value is interpreted as (num_ticks = 2^anim_speed), which each tick lasting 30 ms. Avoid using this callback if possible, since it has to be called each tick for every animated tile. This can be used to create animation frames that last between 30 ms and 33 minutes.