Standardized Railtype Scheme
This railtype label scheme aims to bring order to the uncontrolled growth of railtype labels. It groups the rail types into what matters from a technical perspective. The scheme provides a standardized way of defining railtype labels, based on track gauge and type, speed class, allowable axle weight and electrification type.
It is the explicit intent of this scheme to decouple track sets from vehicle sets to facilitate easy mixing. This way the player can select a track set of choice to go with a train set of choice. It allows the player to play with or without axle load classes, or with or without speed limit classes, simply by loading a track set that does or does not provide these features. In some cases it will also be possible to combine niche track sets, for instance a standard gauge track set with a narrow gauge and a metro track set.
The Label Scheme
A railtype label consists of four characters. In this scheme, each position has a different purpose:
- Track gauge and type class (e.g. standard gauge rail, narrow gauge rail, monorail)
- Speed limit class
- Axle load class (maximum allowed axle weight for this track)
- Energy source type class
In the next sections, each of the four positions will be explained.
Track gauge and type class [X***]
The first position in the railtype label defines track gauge and/or track type class. The following classes are currently defined:
| Track type/gauge | |
|---|---|
| S | Standard gauge rail |
| B | Broad gauge rail |
| N | Narrow gauge rail |
| n | Secondary narrow gauge rail (e.g. when providing both metre and cape gauge, always use N in case of just one type of narrow gauge) |
| D | Dual gauge rail, standard+broad gauge |
| d | Dual gauge rail, standard+narrow gauge |
| M | Monorail |
| L | Magnetic Levitation |
Speed limit class [*X**]
The second position in the railtype label defines the speed limit class. These classes do not map to a fixed numeric value, but are used to define an internal speed limit order for the track set. This means that if your track set has two different speed limits for track types that are otherwise identical, you'll use letters A and B here. In case of three different speed limits, use A, B and C. In case your track set does not employ speed limits, always use A. Train sets do not care about the speed limit, and will always set the lowest speed class, i.e. A.
This gives for instance the following options:
| Speed limit class | |
|---|---|
| A | no speed limits |
OR
| Speed limit class | |
|---|---|
| A | low speed |
| B | high speed |
OR
| Speed limit class | |
|---|---|
| A | low speed |
| B | medium speed |
| C | high speed |
etc.
The speed limit class may also be used for some advanced features of the label scheme, like specialized track types and eyecandy purposes. Be careful not to break the compatibility with other sets when using the speed limit class for these purposes.
An example of a special use is rack rail. In the French set it is used to give rack rail engines a higher speed and TE than normal rail engines when used on rack rail. When defining trains with a special speed limit class, always allow a fallback to speed limit class A via the railtype table.
An example of eyecandy use are urban tracks. These are a variation of regular tracks, but with concrete ground tiles to better match the urban environment. Train sets must not define vehicles for eyecandy classes. If you think you have special vehicles that should only run on the eyecandy class, it is not eyecandy but a separate track gauge/type.
The following special and eyecandy classes have been defined so far:
| Description | Type | Used by | |
|---|---|---|---|
| A-H | speed limits | reserved | |
| R | rack rail | special | French Set Rails |
| S | subterranean | eyecandy | Metro Track Set |
| U | urban | eyecandy | Metro Track Set |
Axle load class [**X*]
The third position defines the axle weight limit. Heavy trains cannot run on tracks with a low axle weight limit; these trains need more expensive tracks with a heigher weight limit. There are five axle load classes A through E. A is for the lowest axle load limit, E for the highest. The exact axle load attached to each class is relative to the track gauge/type and trains in the set.
A train set should set the appropriate axle weight for each train via the railtype label, as to make the set work with track sets that do provide tracks with different weight limits, even if you don't care about it for your trainset. Split all vehicles of a certain track gauge/type into five groups of similar axle weight. The group with the lowest axle weights will get class A, the second lowest class B, etc. up to the group with the highest axle weights which will get class E. Do the same for the other track gauge/types if your train set has those.
A track set does not have to provide a dedicated track type for each axle weight limit. A track set that does not provide a dedicated track for each axle load class, must make sure to map all undefined axle load classes to a real railtype using property 1D (NFO) or alternative_railtype_list (NML). This way a train set can rely on all labels for all axle load classes being available. Example: if you only want to provide 2 axle load classes for standard gauge unelectrified with no speed limits, you can map SAAN + SABN to SACN and SADN to SAEN if the cost difference between the two railtypes is high, or SAAN to SABN and SACN + SADN to SAEN if the cost difference is low.
If you don't want to provide any axle load classes in your track set, it doesn't really matter what axle load class you choose for the track, as you'll be mapping all other classes to this track anyways. But the lowest or highest class are the obvious choice. Example: if your track set only provides narrow gauge unelectrified track with no speed limits and no axle load limits, you may use NAAN for the track label, and provide NABN, NACN, NADN, NAEN in property 1D (NFO) or alternative_railtype_list (NML).
If you need more than five axle load class, you may use lowercase letters for very low axle loads and continue the uppercase letters for very high axle loads. Be advised that your train set may not assume the existance of any other class than A through E, so when the range make sure to program your railtype table such that trains with such a class will fall back to class A or E. If you make a track set with an extended range, be aware that not all train sets will define trains for these tracks. In general: only do this in case of a train set with a matching track set.
For the lowercase letters, b is lower than a, so for increasing axle load limits: b < a < A < B < C etc.
Note that the axle load classes never map to a specific weight in tonnes. For that reason it does not make sense to add a numeric value for the axle load to the name of a track type or in the extended purchase info of a train. Instead use the relative expressions 'very low', 'low', 'medium', 'high' and 'very high' or use the class letters directly.
Energy source type class [***X]
The last position defines the energy source type class. This is split in generic energy source types like overhead wires and third rail and specialized types like alternating and direct current.
A track set that only uses specialized types, should map the generic types to the most suitable specialized type in the set.
A vehicle set that uses specialized types should define a generic type as fallback, via the railtype table. If such a fallback is omitted, please note that certain vehicles may be unavailable depending on track set loaded.
| Generic energy type classes | |
|---|---|
| N | no electrification |
| E | overhead wires/catenary electrification |
| 3 | 3rd rail electrification |
| Specialized energy type classes | Vehicle set fallback | |
|---|---|---|
| Z | 3rd rail and catenary electrification | 3 or E |
| 4 | 4th rail electrification | 3 |
| Y | 4th rail and catenary electrification | 4 or E |
| T | three phase AC electrification | E |
| D | DC catenary electrification | E |
| d | low voltage DC catenary electrification (only when D also used in set) | E |
| A | AC catenary electrification | E |
| a | low voltage AC catenary electrification (only when A also used in set) | E |
If you want multi-voltage/current vehicles in your set (i.e. a train that can run on both AC and DC current), you have to define a dedicated railtype for those vehicles. Without the railtype, it's not possible to define vehicles with this property. If you only have vehicles that can run on either one type of voltage/current or on all types of voltage/current (e.g. a 2-system if you only have A and D tracks, or a 4-system in case of all A, a, D and d), then use the generic class E for vehicles that should be able to run on all different voltage/currents. Also the track set needs to have one at least one railtype with class E defined.
Note that if you want more than one type of multi-voltage/current, you'll quickly get a combinatory explosion of railtype labels, so plan carefully or do not attempt it. For every different multi-voltage/current vehicle type a dedicated railtype is needed. If you want all possible combinations, then you need to define an additional 8 classes. It is not recommended to make your train/track set this complicated.
Example approach for a 4-system set, with trains that can run on either one or all systems:
- E: generic catenary-powered electric engines. "universal" [4-system] if any of D/d/A/a are defined.
- A: generic AC catenary electric engines. 25kV only if a also defined. Vehicle sets should use E as fallback, if defining an engine for A;
- a: 15kV AC catenary electric engines. Only defined if A also defined. Vehicle sets should use A and E as fallback, if defining an engine for a;
- D: generic DC catenary electric engines. 3kV if d also defined. Vehicle sets should use E as fallback, if defining an engine for D;
- d: 1.5kV DC catenary electric engines. Only defined if D also defined. Vehicle sets should use D and E as fallback, if defining an engine for d.
For a 2-system set, you can simply drop a and d.
Standard labels: RAIL, ELRL, MONO, MGLV
It's not possible to undefine the standard railtypes RAIL, ELRL, MONO and MGLV. The game will always add those if there are vehicles defined for these track types. As a result, for a track set it's best not to ignore those standard labels, but rather work with them and define them in the set. If your track set does not have monorail or maglev tracks, there of course is no need to define those. But if your track set defines anything that resembles unelectrified or electrified rail, you should use the RAIL and ELRL labels. Matching labels from the above scheme will then be defined in property 1D (NFO) or alternative_railtype_list (NML).
As vehicles from NewGRFs that do not use explicit railtypes will end up on these standard railtypes, you should use RAIL instead of whatever type could be regarded as the most commonly used unelectrified type, ELRL instead of the most commonly used electrified type and so on. The label according to this scheme is then set as an alternate.
Summary for track sets
This section summarizes the above for track sets.
- [X***] Track gauge and type class
- Define at least one track type for every track gauge/type class you want in your set.
- If you only provide tracks for one gauge/type, consider leaving some free railtypes so a player can load an additional set for some other type.
- [*X**] Speed limit class
- Make sure class A is always available, either directly or via an alternate label.
- Use only class A if you don't want speed limits;
- With speed limits, A is the lowest speed limit. Continue with B, C, etc. for increasing speed limits;
- The speed class can also be used to implement additional eye-candy track types, use letters higher in the alphabet for this.
- [**X*] Axle load class
- Always define all classes A through E for every track type class / electrification combination, either:
- Directly via a real railtype definition;
- Indirectly via the alternate rail type label list, property 1D (NFO) or alternative_railtype_list (NML).
- Extend the predefined classes only if you also provide a train set that makes use of these.
- [***X] Energy source type class
- If your set only uses specialized classes, always map the generic classes to the closest matching specialized type via property 1D.
- Standard labels [RAIL, ELRL, MONO, MGLV]
- Always define the standard labels when possible, instead of what would be the equivalent of the standard label in this scheme.
- Map the equivalent labels from this scheme to the standard labels using property 1D (NFO) or alternative_railtype_list (NML).
Or, put differently, for each gauge/type, select one or more energy source types. For each type/energy combination provide all axle load classes for the speed class "A", either as a real type or as an alternate of another type. Provide more types with a different speed letter if you want to provide several different speeds or other eye-candy tracks.
Summary for train sets
This section summarizes the above for train sets.
- [X***] Track gauge and type class
- Use the track type class that matches the vehicle;
- Define a fallback type via the railtype table in case you want the vehicle to be available on a different track if no matching track set is loaded.
- Specialized subtypes like "n" might not always be available. If you want those vehicles to be still available then, fall back the the generic class (e.g. "N").
- [*X**] Speed limit class
- Always use class A for every vehicle.
- [**X*] Axle load class
- Use all classes A through E according to the maximum axle weight of the vehicle.
- Extend the predefined classes only if you also provide a track set that makes use of these;
- When extending the predefined classes A through E, define a fallback type via the railtype table in case you want the vehicle to be available if no matching track set is loaded.
- [***X] Energy source type class
- Use the energy source type class that matches the vehicle;
- When using specialized classes, define a fallback type via the railtype table in case you want the vehicle to be available if no matching track set is loaded.
- Standard labels [RAIL, ELRL, MONO, MGLV]
- Define a fallback type to the standard labels via the railtype table in case you want the vehicle to be available on the standard tracks if no matching track set is loaded.
Be as specific as you want when selecting the railtype, it is the job of the track set to select a playable, reduced subset out of all possible type combinations.
In case you're not convinced by this scheme
Adopting this scheme gives the player freedom to use any track set in combination with any train set that follow the scheme.
This means that you can make your train set compatible with track sets that provide axle load classes, and track sets that provide speed limits, and at the same time with track sets that provide none of this. This way, the player can decide to play with or without axle load classes, or with or without speed limits, simply by loading a track set that does or does not provide these features.
And for your track set, it means that you can make it as simple or as complicated as you want (within the 64 track type limit), while not having to worry about compatibility with train sets.
Still not convinced? Feel free to use railtype labels of your own, but know that you will likely come to regret that at some point in the future.
Forum topic
If you want to discuss the standardized railtype scheme or have any questions about it, you can visit the forum topic.
"Innsbruck 2022 Convention" for partial compliance
1. The Standardised Railtype Scheme is a useful tool for providing reliable compatibility between train grfs and railtype grfs.
2. The axle load class in the scheme presents a number of issues for compliance.
2.1. Over 10 years since the scheme was standardised, few train grfs implement multiple axle load classes as required. Known examples include Dutch Train Set, French Narrow Gauge Trains, and Finnish Trains.
2.2. Elements of the axle load scheme have proven hard to interpret. For example:
- is it compliant to use fewer than 5 groups for trains?
- there are many more factors to route compatibility than axle load, such as loading gauge, minimum curve, signalling types etc
2.3. Meanwhile multiple train grfs use class 'A' for the axle load for all trains, except where relying on default railtypes such as RAIL and ELRL.
3. The Innsbruck 2022 Convention uses class 'A' for axle load for all trains in a train grf, except where relying on default railtypes such as RAIL and ELRL.
This is not fully compliant with the Standardised Railtype Scheme and does not claim to be.
However train grfs using the Innsbruck 2022 Convention are broadly compatible with railtype grfs using the Standardised Railtype Scheme. Known limitations are that they may not use the full range of features provided by railtype grfs with respect to axle load classes, and may limit the ability of railtype grf authors to achieve their design goals for separating railtypes by axle load.
3.1. The Innsbruck 2022 Convention is not appropriate for train grf authors who wish to provide more than one axle load class.
3.2. The Innsbruck 2022 Convention treats the meaning of 'A' as 'undefined', 'ignored' or 'compatible with most restricted railtype' for axle load.
Axle load class 'A' cannot be safely interpreted as 'universal' because from the perspective of a railtype grf 'A' is 'most restricted railtype', where 'universal' is better represented as 'least restricted railtype', depending how many axle load classes are in use by the railtype grf.
3.3. When the Innsbruck 2022 Convention is used, this does not prevent a train grf being extended in some future release to achieve full compliance with Standardised Railtype Scheme. That choice remains with train grf authors.
3.4. If 2012 could be revisited, providing an optional '_' axle load class in the Standardised Railtype Scheme for 'undefined' would have been preferable, but as of 2022, 'A' is already widely used for this purpose.
