ReadingPatchVariables

From GRFSpecs
Revision as of 20:25, 8 November 2011 by Frosch (talk | contribs) (version tags)
Jump to navigationJump to search

Introduction

Since TTDPatch 2.0.1 alpha 48, it has been possible to use action D to read various special Patch variables. These are usually switch values, but there are also a few other useful values.

Syntax

<Sprite-number> * <Length> 0D <target> <operation> <variable> FE FF FF 00 00
Element Size Description
0D B Defines action 0D
<target> B Target parameter
<operation> B As for ActionD, but only assignment is valid.
<variable> B Patch variable number to read. See below.
FE B Defines a special variable access
FF FF 00 00 D Indicates that a patch variable is being read

variable

The following patch variables are defined:

variable Switch Version Value
00 miscmods/-Yo Not supported by OpenTTD Supported by TTDPatch 2.52.5 Bit switch
01 experimentalfeatures/-XF Not supported by OpenTTD Supported by TTDPatch 2.52.5 Bit switch
02 morevehicles/-x Not supported by OpenTTD Supported by TTDPatch 2.52.5 Vehicle array multiplier
03 mountains and curves/-mc Not supported by OpenTTD Supported by TTDPatch 2.52.5 Two bytes with four sets of two bits
04 planecrashcontrol/-Xc Not supported by OpenTTD Supported by TTDPatch 2.52.5 Bit switch
05 autorenew/-Xa Not supported by OpenTTD Supported by TTDPatch 2.52.5 Signed value
06 multihead/-M Not supported by OpenTTD Supported by TTDPatch 2.52.5 Speed increase, in percent
07 disasters/-XD Not supported by OpenTTD Supported by TTDPatch 2.52.5 Bit switch
08 unifiedmaglev/-XM Not supported by OpenTTD Supported by TTDPatch 2.52.5 Unified maglev mode
09 bridgespeedlimits/-XX Not supported by OpenTTD Supported by TTDPatch 2.52.5 Speed fraction, in percent
0A --- Not supported by OpenTTD Supported by TTDPatch 2.52.5 TTD Language, see the "new scheme" for action 4
0B startyear/-XY Supported by OpenTTD 0.60.6 Supported by TTDPatch 2.52.5 Year-1920
0C morebuildoptions/-YB Not supported by OpenTTD Supported by TTDPatch 2.52.5 Bit switch
0D moresteam/-YM Not supported by OpenTTD Supported by TTDPatch 2.52.5 value=LF (two hex digits), L=length, F=frequency
0E freighttrains/-Yf Supported by OpenTTD 0.60.6 Supported by TTDPatch 2.52.5 weight factor
0F wagonspeedlimits/-YL Supported by OpenTTD 0.60.6 Supported by TTDPatch 2.52.5 Speed increase for empty wagons
10 planespeed/-YP Supported by OpenTTD 0.60.6 Supported by TTDPatch 2.52.5 speed factor
11 dual company colors Supported by OpenTTD 0.60.6 Supported by TTDPatch 2.5 (r1404)2.5 2CC colormap base sprite
12 miscmods2/-Zm Not supported by OpenTTD Supported by TTDPatch 2.6 (r1738)2.6 Bit switch
13 map size information Supported by OpenTTD 0.6 (r11961)0.6 Supported by TTDPatch 2.6 (r1817)2.6 Format = -MABXYSS
M the type of map
  • bit 0 set: squared map. Clear : rectangular map
  • bit 1 set: Y is the bigger edge(bit 0 is clear).Clear : X is the bigger edge.
A minimum edge(log2) of the map
B maximum edge(log2) of the map
XY edges(log2) of each side of the map.
SS combination of both X and Y, thus giving the size(log2) of the map

All map sizes will be substracted by 6, as to keep the size 64 the smallest one, thus zero based

14 maximum height level Supported by OpenTTD 1.2 (r23158)1.2 Not supported by TTDPatch Maximal possible height level of a tile. Currently fixed at 15.

If experimentalfeatures, miscmods, or miscmods2 are off, the corresponding value will be zero. For all other switches, the value is unspecified if the switch is off, so action 7 variable 85 should be checked first.