Difference between revisions of "Action5"

From GRFSpecs
Jump to navigationJump to search
(missing field in syntax)
m (Bot: Automated text replacement (- 2.6 + TTDPatch 2.6))
Line 105: Line 105:
   
 
|-
 
|-
|11||Road stop graphics||8||OpenTTD r9645, 2.6 alpha 0 r1589
+
|11||Road stop graphics||8||OpenTTD r9645, TTDPatch 2.6 alpha 0 r1589
   
 
|-
 
|-
Line 183: Line 183:
 
Sprites are referenced by their offset into the action5 block by a [[VarAction2NewSignals]], hence a logically easily calculable order is advised.
 
Sprites are referenced by their offset into the action5 block by a [[VarAction2NewSignals]], hence a logically easily calculable order is advised.
   
As of 2.6 alpha 0 r1346, the action 5 block defined in the same GRF file as the varaction2, will be used as the base sprite block for the offsets returned by the callback even if it is overridden by a higher priority GRF action 5 definition of the same feature (0E).
+
As of TTDPatch 2.6 alpha 0 r1346, the action 5 block defined in the same GRF file as the varaction2, will be used as the base sprite block for the offsets returned by the callback even if it is overridden by a higher priority GRF action 5 definition of the same feature (0E).
   
 
==== 0F Tracks for Slopes ====
 
==== 0F Tracks for Slopes ====

Revision as of 11:50, 16 June 2011

Introduction

Define TTDPatch specific graphics sets


Action 5 is used to define graphics for several new features of TTDPatch. This is similar to action 1.

Syntax

The data looks as follows:

<Sprite-number> * <Length> 05 <type> <num-sprites> [<offset>]
Element Size Description
<Sprite-number> dec A sequential sprite number
<length> dec The total number of bytes used in this action
05 B Defines action 05
<type> B What type of graphics follow
<num-sprites> B* How many regular sprites follow
<offset> B* Offset in the Action 5 assignable block of sprites

The following num-sprites sprites in the .nfo file have to be RealSprites that will be used as graphics for the given TTDPatch feature, except for type 0A, which requires RecolorSprites.

Action 5 entries in a .grf file which has a regular GRFID (not FFFFFFFF) will always override those from .grf files with a GRFID of FFFFFFFF (starting from TTDPatch 2.0.1 alpha 19).

Description

Sprite-number

This is just the number you are at.

Length

Count the number of bytes in this action.

type

This sets the type of feature that the graphics are for. If bit 7 is set, the offset variable needs to be set. Bit 7 may only be set if the type supports it. The type can be one of:

Type Feature num-sprites (decimal) Minimum version
04 Pre-signal graphics 48
04 Pre-signal and semaphore graphics 112
04 Pre-signal, semaphore, and PBS graphics 240 2.0.1 alpha 41
05 Overhead wires and pylon graphics 48
06 Foundations (retaining walls) for BuildOnSlopes 74
06 Foundations for BuildOnSlopes and half tiles (NS and EW foundations) 90 OpenTTD r11321
07 (a) GUI sprites 93 2.0.1 alpha 43
08 Canals 65 2.0.1 alpha 17
09 One-way road arrows 6 2.0.1 alpha 58
0A Two company color translation maps 256 2.0.1 alpha 67
0B Tram tracks 113 2.0.1 alpha 68
0C Snowy temperate trees 133 2.0.1 alpha 74
0D Coast Tile graphics 16 (18) 2.5 beta 5, OpenTTD r7325 (OpenTTD r11726)
0E New Signals Any 2.6 alpha 0 r1247
0F Sprites for marking tracks on slopes (for track reservation systems like PBS or YAPP) 12 2.6 alpha 0 r1487, OpenTTD r13469
10 Additional airport graphics 15 OpenTTD r9645
11 Road stop graphics 8 OpenTTD r9645, TTDPatch 2.6 alpha 0 r1589
12 Aqueduct graphics 8 2.6 alpha 0 r1498, OpenTTD r13464
13 Autorail sprites 55 OpenTTD r11433
14,94 Flag sprites Up to 36 OpenTTD r11433
15,95 OpenTTD GUI sprites Up to 160 OpenTTD r11433
16,96 Airport preview sprites Up to 9 OpenTTD r20370

(a) Type 07 only requires 73 sprites in the stable (2.5 branch); the extra sprites are the clone train and build canal cursors.

04 Signal graphics.

Signal graphics come in groups of 16. These groups contain sprites in the same order as sprites 1275-1290 in trg1[r].grf; red, then green, for each of: SW-facing, NE-facing, NW-facing, SE-facing, E-facing, W-facing, S-facing, N-facing.

Group(s) Contents
0 lighted entrance signals
1 lighted exit signals
2 lighted combo signals
3 standard (non-pre-signal) semaphore signals
4..6 repeat 0..2 for semaphores
7 standard lighted PBS signals
8..14 repeat 0..6 for PBS signals

0C Snowy temperate trees

If the temperate snow line is enabled, you can use this to specify the snowy versions of temperate trees. The sprites must be the snowy versions of sprites 1576-1708 from TRG1.GRF, in the same order as they appear there.

0D Coast tile sprites

If diagonal flooding is enabled then due to new corner coasts, you can use this to give a complete set of replacement coast tile sprites. There are 16 in total, 8 original Transport Tycoon Deluxe sprites and 8 for the corner slopes. Order of the sprites (1) is as follows:

3997, 4063, 4064, 4068, 4062, 3998, 4066, 3988,
4065, 4069, 3996, 3992, 4067, 3994, 3995, 3999.

(1) Sprite numbers from trg1(r).pcx.

The 16 sprites for feature 0D

Additionally, OpenTTD (since r11726) supports another method of supplying all additional coast tile sprites, but this is only allowed in the extra NewGRF of Graphic Sets. In this, only 10 sprites are supplied in the same order as the 16 sprites above, but without the coast sprites already in trg1(r).pcx. Note that the 10 sprites version supplies two additional slopes, but they are not used, and are currently unlikely to be ever used.

Only 10 sprites are required for OpenTTD base graphic sets

In OpenTTD 10 sprites for type 0D is enough in base graphic sets. The 16 sprites version should not be used for base graphics.

The reason for the existence of a 10 sprite version is to remove the need for including original graphics, and to keep compatibility with old NewGRFs that replace the original shore graphics using Action A without adding new shores using Action 5: When a NewGRF uses the 16 sprites version it takes precedence above any NewGRF replacing the shore graphics using Action A; when a NewGRF uses Action A to replace shore graphics it takes precedence above a 10-sprite Action 5, effectively disabling diagonal flooding. Also due to compatibility the 10 sprites version is invalid for normal NewGRFs, which are not the "extra" NewGRF of some Base Graphics Set.

0E New Signals

Any number of real and recolour sprites can be specified in the action in any order.

Sprites are referenced by their offset into the action5 block by a VarAction2NewSignals, hence a logically easily calculable order is advised.

As of TTDPatch 2.6 alpha 0 r1346, the action 5 block defined in the same GRF file as the varaction2, will be used as the base sprite block for the offsets returned by the callback even if it is overridden by a higher priority GRF action 5 definition of the same feature (0E).

0F Tracks for Slopes

This should be in the same order as sprites 1031 to 1035 (1). These should only be the rails, basically the same format as sprites 1005 to 1010 (1). There should be 3 groups of these sprites, one for each rail type (railroad, monorail, maglev).

(1) Sprite numbers from trg1r.pcx.

11 Road stop graphics

Road stop graphics consist of 2 groups of 4 sprites. The first group contains graphics for bus stops, second for truck stops. In each group, the sprites are in the following order: SW, NE, NW, SE.

SW and NE sprites are used with road going along the Y axis ( .\' ), NW and SE with road along the X axis( '/. ).

Internally, the stations are defined using the following station layouts:

\d1313

\b13 \b0 \b0 \b3 \b16 \b16 <SW sprite>

\b0 \b0 \b0 \b3 \b16 \b16 <NE sprite>

80

and

\d1314

\b0 \b0 \b0 \b16 \b3 \b16 <NW sprite>

\b0 \b13 \b0 \b16 \b3 \b16 <SE sprite>

80

where 1313 and 1314 are town road sprites.

Reference sprites can be found in roadstops.grf (OpenTTD) or ttdpbase(w).grf (TTDPatch).

Note: As of OpenTTD r10185, the behaviour of this feature is identical in both games.

12 Aqueducts

8 real sprites should be given. Firstly: 4 bridge end sprites in the order: SW, SE, NE, NW, where the direction is that heading onto the aqueduct. Then 2 middle part sprites for the X and Y directions. Followed by two pillar sprites for the X and Y directions. For examples of where the division between middle sprites and pillars should be made see sprites 2437 to 2592 (1), or an existing aqueduct GRF. Note, that for higher bridges to work effectively, pillars should be approximately 8px in height.

num-sprites

The number of sprites that follow.

Since TTDPatch 2.0.1 alpha 49, this value is an extended byte.

Note that it is not generally an error to provide more sprites than required, but this does expend sprite slots unnecessarily.

offset

The offset in the Action 5 assignable block of sprites. This term is only read when bit 7 of the type has been set. It can be used to only replace a subset of sprites from a set.

Note: When creating a TTDPatch compatible grf, you have to skip the OpenTTD specific Action 05's using an Action 09 rather than an Action 07. Using the latter will result in an error on your Action 05 when using the grf in TTDPatch.

Example

Something to go here