Action2/Sprite Layout
Action2 Sprite Layout
| Feature | TTDPatch | OpenTTD |
|---|---|---|
| Houses | 2.0.1 alpha ? | ? |
| Industry Tiles | ? | 0.6 |
| Objects | 2.6 alpha r2023 | 1.1.0 |
| Airport Tiles | not supported | 1.1.0 |
This Action2 defines a spritelayout for a tile. There are two formats available:
- Basic format for a single groundsprite and a single building sprite.
- Extended format for combining multiple sprites.
Basic format for tiles with a single building sprite
<Sprite-number> * <Length> 02 07/09/0F <set-id> 00 <groundsprite> <buildingsprite> <xoffset> <yoffset> <xextent> <yextent> <zextent>
| Element | Size | Description |
|---|---|---|
| <Sprite-number> | dec | A sequential sprite number |
| <length> | dec | The total number of bytes used in this action |
| 02 | B | Defines action 02 |
| 07/09/0F | B | feature 7=town buildings, 9=industry tiles, 0F = objects, or 11 airport tiles |
| <set-id> | B | ID for this definition |
| 00 | B | Literal 0 (to distinguish this definition from random/variational lists) |
| <groundsprite> | D | Ground sprite for the building (see format below) |
| <buildingsprite> | D | The sprite of the building (see format below), can be zero to indicate that no building sprite should be displayed (useful for early building stages) |
| <xofs> | B | x-offset from northern tile corner (as a signed byte) |
| <yofs> | B | y-offset from northern tile corner (as a signed byte) |
| <xextent> | B | size of sprite in x direction |
| <yextent> | B | size of sprite in y direction |
| <zextent> | B | size of sprite in z direction |
In the above, xofs, yofs, xextent, yextent and zextent define the 3D bounding box of the building sprite not including the ground sprite. The z-offset is always zero for buildings (TTD doesn't support floating buildings). Please note that xofs/xextent and yofs/yextent pairs that place the bounding box off the tile are not recommended.
Extended format using multiple combined sprites
Since TTDPatch 2.0.1 alpha 55 vcs 3, houses, industry (and object) tiles support an extended syntax as well, which looks as follows:
<Sprite-number> * <Length> 02 07/09/0F <set-id> <num-sprites> <groundsprite> [<buildingsprite> (<xoffset> <yoffset> <zoffset> <xextent> <yextent> <zextent>) | (<xpixeloffset> <ypixeloffset> 80)] ...
| Element | Size | Description |
|---|---|---|
| <Sprite-number> | dec | A sequential sprite number |
| <length> | dec | The total number of bytes used in this action |
| 02 | B | Defines action 02 |
| 07/09/0F | B | feature 7=town buildings, 9=industry tiles or 0F = objects |
| <set-id> | B | ID for this definition |
| <num-sprites> | B | Number of following building sprites (the groundsprite mustn't be counted). Allowed range: 1 to 63 (0x01 to 0x3F). Adding 0x40 makes the layout an Advanced Spritelayout with register modifiers (since OpenTTD r22518; to be documented). |
| <groundsprite> | D | Ground sprite for the building (see format below) |
| <buildingsprite> | D | The sprite to be drawn. Unlike the basic format, zero isn't allowed here. |
| -- for sprites defining a new bounding box -- | ||
| <xofs> | B | x-offset from northern tile corner (as a signed byte) |
| <yofs> | B | y-offset from northern tile corner (as a signed byte) |
| <zofs> | B | z-offset from the ground |
| <xextent> | B | size of sprite in x direction |
| <yextent> | B | size of sprite in y direction |
| <zextent> | B | size of sprite in z direction |
| -- for sprites sharing their bounding box with the previous sprite -- | ||
| <xpixeloffset> | B | x offset from the top left corner of the previous sprite |
| <ypixeloffset> | B | y offset from the top left corner of the previous sprite |
| 80 | B | a literal 80h byte to distinguish from new-bounding-box definitions |
Note: restrictions for sprites sharing their bounding box are the same as explained for station tiles.
Since OpenTTD r18959 you can draw multiple ground sprites for a tile, which is useful if you want to use the usual grass/water/concrete groundtile, but still need to add features to it without using a new bounding box. To do so use the syntax of sprites sharing the previous bounding box, but use it before the first bounding box definition. xpixeloffset and ypixeloffset refer to the usual spot of groundtiles.
The same feature is also partially supported in TTDPatch since TTDPatch 2.6 r2313: TTDPatch ignores the xpixeloffset and ypixeloffset fields and always uses (0,0) for the offset. If you are developing a GRF that needs to be compatible with both OpenTTD and TTDPatch, you should always keep xpixeloffset and ypixeloffset zero to get the same effect in both games.
Sprite definition
The ground and building sprite fields have the following format:
| Bits | Content |
|---|---|
| 0-13 | Sprite number, exact meaning specified by bit 31 |
| 14-15 | 0: draw sprite normally, 1: draw sprite in transparent mode, 2: recolor sprite |
| 16-29 | Color translation special sprite number, see below |
| 30 | If set, sprite is drawn normally even in transparent buildings mode (for building sprites only; supported in TTDPatch 2.0.1 alpha 57 or later) |
| 31 | Sprite type, see below |
Since TTDPatch 2.0.1 alpha 57, the groundsprite value can be zero if no ground sprite is needed (this is useful if you need to draw custom foundations, see example). Ground sprites are always drawn normally, so bit 30 is ignored for them. Bit 30 may get a different meaning for ground sprites in a later version of TTDPatch, so please leave it zero for now. This does not apply to additional groundsprites using the "<xpixeloffset> <ypixeloffset> 80"-syntax (see above); for these bit 30 has the same meaning as for building sprites.
Colour translation special sprite number
This is used only if bits 14 or 15 are nonzero. Bits 16-29 must be the number of a regular TTD sprite containing a colour translation table (see below for available translation tables). For transparent mode, a suitable translation table is needed, e.g. that of TTD´s sprite number 802 (s.b.). See RecolorSprites for more information on the usage of transparent and recolouring sprites.
For houses, if no recolour sprite is given but recolouring is turned on in bits 14-15, there are two possibilities:
- If you have callback 1E enabled, it is called to determine the colour mapping.
- If callback 1E is disabled or fails, one of the colours specified in property 17 will be chosen randomly.
See RecolorSprites for a list of available colour translations.
For industry tiles, if this field is zero, but recolouring is turned on in bits 14 or 15, the colour of the containing industry will automatically be applied.
The ground sprite should be exactly the same size and shape as TTD's flat tile. In general, it shouldn't contain anything that has a z-dimension because any non-ground sprite will cover it.
Useful values for ground sprites:
| Sprite number (decimal) | Contents |
|---|---|
| 3924 | bare land |
| 3981 | grass |
| 4061 | water |
| 4550 | snow or desert (depending on climate) |
| 1420 | concrete |
Please note that all the ground sprite becomes visible in "transparent buildings" mode, so you should draw parts that seem to be hidden as well.
Sprite type
If bit 31 is clear, the bottom 14 bits contain a regular TTD sprite number.
If bit 31 is set, the bottom 14 bits contain a number of a sprite set in the most recent action 1, and the used sprite is decided according to the current construction state and the number of sprites in the set:
- if there's only one sprite, it's used always
- if there are two sprites, the first is used during construction (stages 0-2), and the second is used for the finished building (stage 3)
- if there are three sprites, the first will be used in the beginning of the construction (stage 0), the second will be used during the rest of the construction (stages 1 and 2) and the third will be used for the complete building (stage 3)
- if there are four or more sprites, the first four will be used for the four construction stages. Sprites after the first four are always ignored.
