Action0/Railtypes

Action 0 properties for rail types

Action 0 - Properties for rail types

Defining properties of rail types.

Note: This feature is only available in OpenTTD > r18969

Properties

Number	Version	Size	Description
08	1.0	4*B	Rail type label
09	1.0	W	StringID: Build rail toolbar caption
0A	1.0	W	StringID: Rail construction dropdown text
0B	1.0	W	StringID: Build vehicle window caption
0C	1.0	W	StringID: Autoreplace text
0D	1.0	W	StringID: New engine text
0E	1.0	B n*D	Compatible rail type list
0F	1.0	B n*D	Powered rail type list
10	1.0	B	Rail type flags
11	1.0	B	Curve speed advantage multiplier
12	1.0	B	Station (and depot) graphics
13	1.0	W	Construction costs
14	1.0	W	Speed limit
15	1.0	B	Acceleration model
16	1.0	B	Minimap colour
17	1.1	D	Introduction date
18	1.1	B n*D	Introduction required rail type list
19	1.1	B n*D	Introduced rail type list
1A	1.1	B	Sort order

In NFO, rail type IDs will be GRF local, with an ID to label mapping. Therefore to modify an existing rail type, specify its label in property 08. To create a new rail type, again just specify its label in property 08. This way there is no need for complex GRM mechanisms to allocate IDs. If a label 'clashes' with another GRF, then one GRF will end up modifying the properties instead of creating a new rail type.

When a new rail type is created, it is populated with the information from the first rail type, except that the compatible and powered list contain only the rail type being created. However, no default values should be assumed, as the first rail type may have been modified.

Rail type label (08)

These are globally unique four-letter identifiers for specific rail types (analoguous to cargo labels), used to make various rail types accessible from train vehicle grfs. Reserved labels for default rail types are:

Label	Rail Type
RAIL	Normal Rail
ELRL	Electrified Rail
MONO	Mono Rail
MGLV	Maglev Rail

Rail type sets may use up to 16 railtypes and have to specify their own labels.

See also Rail Type Translation Table for further info.

Build rail toolbar caption (09)

String ID of the name of the rail type as shown in the toolbar caption.

OpenTTD before r20342 and 1.0.3 require the string to start with the white control code. Later versions of OpenTTD will automatically default to white.

Rail construction dropdown text (0A)

String ID for text in the dropdown of all rail types.

This string must never start with a colour control code.

Build vehicle window caption (0B)

String ID for build vehicle window caption.

OpenTTD before r20342 and 1.0.3 require the string to start with the white control code. Later versions of OpenTTD will automatically default to white.

Autoreplace text (0C)

String ID for rail type shown in autoreplace window.

New engines (0D)

StringID to use for showing texts of the type "We have invented a new <rail type> engine".

Compatible rail type list (0E)

List of rail types on which trains of this rail type can run, even though they might not be powered. E.g. wagons/engines of "eletrified rail"-type are also compatible to "normal rail" and "third rail" type, but they are not powered (there need to be an other powered engine in the consist to move the train).

The format is:

0E <nvar> (<rail type label>){n}

That is you give the number of compatible rail types in a single byte followed by a list of that length of rail type labels. A rail type is automatically compatible (and powered) with itself, so you don't need to list the current rail type.

Note that these properties apply to trains of this rail type, not the track. If you want trains of other rail types to be able to run on your rail types, you must set the compatible rail types property for each rail type. Setting these properties behaves always incremental, so you only need to the set additional bits for each other rail type, you cannot remove compatibility/poweredness once it is set (by some other grf).

Powered rail type list (0F)

List of rail types on which trains of this rail type are powered. E.g. engines of "normal rail"-type are powered on "electrified rail"- and "third-rail"-type as well.

Same format as for property 0E above.

Rail type flags (10)

Flags to define properties related to the rail type:

Bit	Value	Version	Meaning
0	1	1.0	Draw catenary for this rail
1	2	1.1	Disallow level crossings for this rail

Curve Speed advantage multiplier (11)

This property sets the multiplier to the curve speed advantage which all trains running on this track type get. The base curve speed advantage is given by the multiplication of the value of this property with the base speed advantage - which depends on the curve length in wagons:

Curve Length	Base Speed Adv.
0 (90° turn)	30
1 (2x45° turn)	44
2	55
3	66
4	75
5	84
6	91
7	98
8	103
9	108
10	111
11	114
12+	115

"Curve length" is the average number of wagons of the train between turns. However, very sharp turns (values 0 and 1) are not averaged out in longer trains.

The maximum speed for a train in a curve is defined by "base speed advantage" * (2 + "property 11"). Tilting trains get an additional bonus of 20% to this value.

For the default rail types this property is 0 for normal rail and electrified rail, 1 for monorail, and 2 for maglev.

Station (and depot) graphics (12)

This property defines the default graphics for the stations. If no depot sprites are defined, this also defines at the same time the depot sprites to be used. There are three kind of default stations (and depots), usually associated with rail, monorail and maglev tracks. Valid values are:

Value	Meaning
0	Normal Rail
1	Monorail
2	Maglev

Speed limit (14)

Speed limit in mph*1.6 (approx. km/h). Set to "0" for no limit at all.

Acceleration model (15)

This property defines the acceleration model used. Valid values range from 0 to 2:

Value	Meaning
0	Normal Rail
1	Monorail
2	Maglev

There is currently no difference between normal rail and monorail.

Map colour (16)

This property defines the colour this track type is drawn in the minimap view. The byte value specifies the colour entry in the DOS palette.

Introduction date (17)

This property defines the long date formatted introduction date of this rail type. With this property set the rail type will be introduced at (or after) this date when all of the introduction required rail types are available to the company of the player, or whenever a vehicle using this rail type gets introduced whichever is first.

Introduction required rail type list (18)

List of rail types on that need to be available to the company of the player for this rail type to be introduced at (or after) the introduction date. This limit does not apply when the rail type is introduced by the introduction of a vehicle.

Same format as for property 0E above.

This can, for example, be used to introduce a third rail with catenary track type when both third rail and catenary rail types are available.

Introduced rail type list (19)

List of rail types that get introduced when this rail type is introduced. For example, to make sure that when a fast rail type is introduced the slow variant exists.

Same format as for property 0E above.

Sort order (1A)

Property for influencing the sort order of the drop down lists with rail types. Default values are as follows:

Value	Meaning
07	Normal Rail
17	Electrified Rail
27	Monorail
37	Maglev
n7	Railtype #n

Thus the rail type that (internally) gets index 8 will get a default value of 87. These defaults are to keep the ordering when this property is not supported as they were.

Example

To be written