Difference between revisions of "Action0/Vehicles/Trains"

From GRFSpecs
Jump to navigationJump to search
m (→‎Properties: c&p error)
(→‎Properties: GRF version icons)
Line 33: Line 33:
 
|18||B||{{ottdp| | }}||Engine rank for the AI (AI selects the highest-rank engine of those it can buy)||no
 
|18||B||{{ottdp| | }}||Engine rank for the AI (AI selects the highest-rank engine of those it can buy)||no
 
|-
 
|-
|19||B||{{ottdp| | }} 1||Engine traction type (see below)||no
+
|19||B||{{ottdp| | }}{{grf|1}}||Engine traction type (see below)||no
 
|-
 
|-
|1A||B/B*||{{ottdp|0.7| |ottdrev=r13831}} 1||Not a property, but an action: sort the purchase list.||no
+
|1A||B/B*||{{ottdp|0.7| |ottdrev=r13831}}{{grf|1}}||Not a property, but an action: sort the purchase list.||no
 
|-
 
|-
|1B||W||{{ottdp| | }} 6||Power added by each wagon connected to this engine, see below||should be zero
+
|1B||W||{{ottdp| | }}{{grf|6}}||Power added by each wagon connected to this engine, see below||should be zero
 
|-
 
|-
|1C||B||{{ottdp| | }} 6||Refit cost, using 50% of the [[BaseCosts|purchase price cost base]]||yes
+
|1C||B||{{ottdp| | }}{{grf|6}}||Refit cost, using 50% of the [[BaseCosts|purchase price cost base]]||yes
 
|-
 
|-
|1D||D||{{ottdp| | }} 6||Bit mask of cargo types available for refitting, see column 2 (bit value) in [[CargoTypes]]||yes
+
|1D||D||{{ottdp| | }}{{grf|6}}||Bit mask of cargo types available for refitting, see column 2 (bit value) in [[CargoTypes]]||yes
 
|-
 
|-
|1E||B||{{ottdp| | }} 6||Callback flags bit mask, see below||yes
+
|1E||B||{{ottdp| | }}{{grf|6}}||Callback flags bit mask, see below||yes
 
|-
 
|-
 
|1F||B||{{ottdp| |2.5|ttdprev=alpha 19}}||Coefficient of tractive effort||should be zero
 
|1F||B||{{ottdp| |2.5|ttdprev=alpha 19}}||Coefficient of tractive effort||should be zero
Line 49: Line 49:
 
|20||B||{{ottdp| |2.5|ttdprev=alpha 27}}||Coefficient of air drag||should be zero
 
|20||B||{{ottdp| |2.5|ttdprev=alpha 27}}||Coefficient of air drag||should be zero
 
|-
 
|-
|21||B||{{ottdp| | }} 2||Make vehicle shorter by this amount, see below||yes
+
|21||B||{{ottdp| | }}{{grf|2}}||Make vehicle shorter by this amount, see below||yes
 
|-
 
|-
|22||B||{{ottdp| | }} 6||Set visual effect type (steam/smoke/sparks) as well as position, see below||yes
+
|22||B||{{ottdp| | }}{{grf|6}}||Set visual effect type (steam/smoke/sparks) as well as position, see below||yes
 
|-
 
|-
|23||B||{{ottdp| | }} 6||Set how much weight is added by making wagons powered (i.e. weight of engine), see below||should be zero
+
|23||B||{{ottdp| | }}{{grf|6}}||Set how much weight is added by making wagons powered (i.e. weight of engine), see below||should be zero
 
|-
 
|-
 
|24||B||{{ottdp| |2.5|ttdprev=alpha 44}}||High byte of vehicle weight, weight will be prop.24*256+prop.16||should be zero
 
|24||B||{{ottdp| |2.5|ttdprev=alpha 44}}||High byte of vehicle weight, weight will be prop.24*256+prop.16||should be zero

Revision as of 16:36, 23 July 2011

Introduction

Defining properties of train vehicles.

Properties

Number Size Version Description Available for articulated parts
05 B Supported by OpenTTD Supported by TTDPatch Track type (see below) should be same as front
08 B Supported by OpenTTD Supported by TTDPatch AI special flag: set to 1 if engine is 'optimized' for passenger service (AI won't use it for other cargo), 0 otherwise no
09 W Supported by OpenTTD Supported by TTDPatch Speed in mph*1.6 (see below) no
0B W Supported by OpenTTD Supported by TTDPatch Power (0 for wagons) should be zero
0D B Supported by OpenTTD Supported by TTDPatch Running cost factor (0 for wagons) should be zero
0E D Supported by OpenTTD Supported by TTDPatch Running cost base, see below should be zero
12 B Supported by OpenTTD Supported by TTDPatch Sprite ID (FD for new graphics) yes
13 B Supported by OpenTTD Supported by TTDPatch Dual-headed flag; 1 if dual-headed engine, 0 otherwise should be zero also for front
14 B Supported by OpenTTD Supported by TTDPatch Cargo capacity yes
15 B Supported by OpenTTD Supported by TTDPatch Cargo type, see column 3 (type B) in CargoTypes yes
16 B Supported by OpenTTD Supported by TTDPatch Weight in tons should be zero
17 B Supported by OpenTTD Supported by TTDPatch Cost factor should be zero
18 B Supported by OpenTTD Supported by TTDPatch Engine rank for the AI (AI selects the highest-rank engine of those it can buy) no
19 B Supported by OpenTTD Supported by TTDPatchGRFv1 Engine traction type (see below) no
1A B/B* Supported by OpenTTD 0.7 (r13831)0.7 Supported by TTDPatchGRFv1 Not a property, but an action: sort the purchase list. no
1B W Supported by OpenTTD Supported by TTDPatchGRFv6 Power added by each wagon connected to this engine, see below should be zero
1C B Supported by OpenTTD Supported by TTDPatchGRFv6 Refit cost, using 50% of the purchase price cost base yes
1D D Supported by OpenTTD Supported by TTDPatchGRFv6 Bit mask of cargo types available for refitting, see column 2 (bit value) in CargoTypes yes
1E B Supported by OpenTTD Supported by TTDPatchGRFv6 Callback flags bit mask, see below yes
1F B Supported by OpenTTD Supported by TTDPatch 2.5 (alpha 19)2.5 Coefficient of tractive effort should be zero
20 B Supported by OpenTTD Supported by TTDPatch 2.5 (alpha 27)2.5 Coefficient of air drag should be zero
21 B Supported by OpenTTD Supported by TTDPatchGRFv2 Make vehicle shorter by this amount, see below yes
22 B Supported by OpenTTD Supported by TTDPatchGRFv6 Set visual effect type (steam/smoke/sparks) as well as position, see below yes
23 B Supported by OpenTTD Supported by TTDPatchGRFv6 Set how much weight is added by making wagons powered (i.e. weight of engine), see below should be zero
24 B Supported by OpenTTD Supported by TTDPatch 2.5 (alpha 44)2.5 High byte of vehicle weight, weight will be prop.24*256+prop.16 should be zero
25 B Supported by OpenTTD Supported by TTDPatch 2.5 (alpha 44)2.5 User-defined bit mask to set when checking veh. var. 42 yes
26 B Supported by OpenTTD Supported by TTDPatch 2.5 (alpha 44)2.5 Retire vehicle early, this many years before the end of phase 2 (see Action0General) no
27 B Supported by OpenTTD Supported by TTDPatch 2.5 (alpha 58)2.5 Miscellaneous flags partly
28 W Supported by OpenTTD Supported by TTDPatch 2.5 (alpha 58)2.5 Refittable cargo classes yes
29 W Supported by OpenTTD Supported by TTDPatch 2.5 (alpha 58)2.5 Non-refittable cargo classes yes
2A D Supported by OpenTTD 0.6 (r7191)0.6 Supported by TTDPatch 2.5 (r1210)2.5 Long format introduction date no

Description

Track type (05)

Set track type of vehicle: 0 = rail, 1 = monorail, 2 = maglev. For setting the appropriate traction type, see prop19. In OpenTTD, if a rail type translation table is loaded, this property is an index into the table instead.

Speed (09)

Train speed is in units of mph*1.6, i.e. approximately km/h.

For wagons, this value is only used if the "wagonspeedlimit" switch is on, and it limits the speed of the train to that of the lowest wagon speed.  This limit is ignored for wagons with a livery override for the current train, so that train sets always get their max speed from the engine's max speed.

For wagons, a value of 0 means "default" (which depends on cargo type and date of introduction), and FFFF means no limit.

Power (0B)

The power of the engine, in HP.

A value of 0 means that the vehicle will be a wagon, otherwise it will be an engine.

Running cost base (0E) and factor (0D)

TTD calculates all costs by multiplying a 32-bit base amount with an 8-bit factor.  The base amount is changed according to inflation, whereas the factor remains constant.

For the running costs of train vehicles, the following base amounts are available depending on the vehicle type (the value here is a pointer into TTD's memory where the actual amount is stored):

Type Value in little-endian notation
Steam engines 4C30 30 4C 00 00
Diesel engines 4C36 36 4C 00 00
Electric engines 4C3C 3C 4C 00 00
Wagons 0 00 00 00 00

Theoretically, you could use pointers to other base amounts available in TTD, but these are the numbers TTD uses for train vehicles.

The following are some real values for maintenance costs depending on the setting of the above two factors.  This value is correct for medium difficulty, but increases and decreases for hard and easy difficulties respectively.  These are the costs of a new game starting in 1921, because they obviously increase with inflation over time (unless noinflation is turned on).

Running cost base 4C30 (steam)

Running cost factor Maintenance cost
01 $ 42
10 $ 700
20 $ 1.400
80 $ 5.600
A0 $ 7.000
FF $ 11.112

Running cost base 4C36 (diesel)

Running cost factor Maintenance cost
01 $ 40
10 $ 650
20 $ 1.300
80 $ 5.200
A0 $ 6.500
FF $ 10.318

Running cost base 4C3C (electric)

Running cost factor Maintenance cost
01 $ 36
10 $ 600
20 $ 1.200
80 $ 4.800
A0 $ 6.000
FF $ 9.524

Cost factor (17)

The cost factor is a bit-coded value which determines how expensive an engine is. There is no distinction between steam, diesel or electric engines, they all use the same cost factor. The table below gives you some values to use for finding the right price for your engines.

Cost factor Price
01 $ 3.124
10 $ 50.000
20 $ 100.000
80 $ 400.000
A0 $ 500.000
FF $ 796.874

Engine traction type (19)

This sets the traction type of a train engine, i.e. whether it is powered by steam, diesel, electric, monorail or maglev technology.  It also sets the corresponding sound effect of the engine, and if property 22 is not set, the visual effect as well.

The following ranges are available (and it does not matter which value you pick):

Values Traction type
00..07 Steam
08..27 Diesel
28..31 Electric
32..37 Monorail
38..41 Maglev

Default value is 00, i.e. steam. For setting the appropriate track type, see prop05. In OpenTTD, if a rail type translation table is loaded, setting this property does NOT alter the track type.

Sort vehicle list (1A)

This property is an extended byte in OpenTTD since r13831!

This is not a property as such, but an action.  It forces TTDPatch to shuffle the vehicle this "property" is being set for in front of the vehicle with the given value of the property.  The order of this list is only used in the train purchase window.

For example, setting prop. 1A for vehicle 09 to a value of 07 would lead to the following internal list: ... 05 06 09 07 08 0A 0B ...

This property can not simply be overwritten, because the list is already shuffled when trying to do so.  It is possible to reset the list to its original order with a special action 0 that has num-info set to 0, and only sets property 1A for trains:

00 00 01 00 00 1A

Resetting the list should however only be done by sets that contain replacements for all train vehicles.

Powered train wagons (1B and 23, see also 22)

Normally, train wagons are unpowered in TTD, and if you set property 0B to a non-zero value, they become engines instead.  Therefore, to model real-life trains where wagons have power, a different mechanism is needed. To make train wagons powered, you set property 1B of the engine instead of the wagon. This determines how much power each wagon adds to the train when attached to this engine. This only applies to wagons with a graphics override for this engine as well.  This means that for example passenger wagons (with an override) will add power, but coal wagons (with no override) will not.

In addition to adding power, these wagons are also heavier by the amount set in property 23.

Callbacks (1E)

For trains, the following callbacks have to be enabled by setting the corresponding bit in property 1E (certain other, not as frequently used callbacks are available without setting a bit here):

Bit Value Variable 0C value Callback
0 1 10 Powered wagons and visual effect
1 2 11 Wagon length
2 4 12 Load amount
3 8 15 Set refitted capacity
4 10 16 Build articulated engines
5 20 19 show a suffix after the cargo type name
6 40 2D Select color mapping for vehicle
7 80 33 Sound effect callbacks

Bit is the bit you have to set, you do this by adding all the values for all the bits. Variable 0C value is what variable 0C will be set to, for checking it in the VarAction2 for callbacks.

Callbacks 1D (Can wagon be attached?), 23 (Additional text in purchase screen), 31 (Start/stop check), 32    (32-day callback), 34     (Autoreplace vehicle selection) and 36 (Change Vehicle Properties) do not need a bit to activate them, they are always active and will be used if defined in the action 3/action 2 chain.

Coefficient of tractive effort (1F)

This cofficient sets what fraction of the vehicle weight is equal to the maximum tractive effort.  This includes the effect of having some unpowered axles, as well as the coefficient of friction that is available.

Theoretically, this value should be calculated by taking the ratio of adhesive weight Wadh (i.e. the vehicle weight that rests on powered axles) times the coefficient of friction µ between the wheels and the rails to the total vehicle weight W, times 255, and convert to hex:

prop. 1F = HEX ((Wadh * µ / W) * 255)

With prop. 1F having a value of FF, the tractive effort is equal to the vehicle weight, for 80, it is half, and so on. If not set, a default of 4C is used, for a fraction of 0.30, corresponding to Wadh=W and a coefficient of friction of 0.30, which is the value used by the patch before TTDPatch 2.0.1 alpha 19.

Sometimes you know the real-life tractive effort instead of adhesive weight and coefficient of friction. To help calculating prop. 1F in that case, here's a small example using the NS 1600 (Electric) with a mass of 84 tons and real-life tractive effort (TEreal) of 259 kN. To quickly find the value for property 1F you fill in the following formula:

prop. 1F = HEX ((TEreal / (Mass * g) * 255)

That may look confusing but you already know all variables:

prop. 1F = HEX ((259 / (84 * 9.8) * 255)

prop. 1F = HEX (0.3146 *255) = HEX(80.229)

HEX calculations only work with figures in the natural domain: each figure has to be a positive and round figure. Therefore the value you convert to HEX isn't 80.229 but 80:

HEX 80 = 50

Property 1F for the NS 1600 (Electric) would then be: 1F 50.

Coefficient of air drag (20)

This property sets the air drag coefficient c2 used for the realistic acceleration model, from 01 (no airdrag) to FF (most air drag) in arbitrary units. 00 means to use the default value that depends on the top speed (to simulate the fact that high-speed engines are more streamlined).

The default values are the following:

top speed (mph/1.6) <16 16 24 32 48 64 96 128 192 256 ...
c2 192 128 96 64 48 32 24 16 12 8


For higher speeds, the series is continued in the same manner.

Air drag in Newtons will then be c2*v*v with v in m/s, although it is probably futile to attempt to make c2 a realistic number due to the lack of TTD's consistent scaling. If a train doesn't reach its historical top speed, you might try setting the value of prop. 20 one or two steps lower than the default above, otherwise it's probably a good idea to leave it at the default.

Shorter train vehicles (21)

This property reduces the length of train vehicles, in units of 1/8th (12.5%). The value 00 means the vehicle has the full length, 01 means shorter by 1/8th (12.5%), up to 05=shorter by 5/8ths (62.5%). Larger numbers will not work properly (**), except at the end of the train*. The vehicle length is set whenever it leaves a depot. This property does not work for the first vehicle in a train (i.e. the engine).

(*) This means that it is only safe to use values larger than 05 in the length callback making sure that they are only returned for the very last vehicle in the train. Otherwise the train will occasionally fall apart, with the wagons after the shortest one stopping to move.

(**) This restriction has been removed in OpenTTD r15793. Every vehicle can have a length between 1/8 and 8/8 independent of its position in the chain.


Visual effects and wagon power (22)

By default, the visual effect of train engines is determined by the traction type (property 19). With this option you can change the type of effect as well as the position of it relative to the vehicle. (Note: for TTDPatch and OpenTTD up to r21229 only the positioning of steam actually works. For OpenTTD r21230 and later positioning diesel smoke and electric sparks works as well) The position of the effect provides a range from 0 to F that is added to the type of the effect.

Position 0 corresponds to a point half a vehicle length ahead of the vehicle, 4 is the front of the vehicle, 8 the middle, C the end and F is a half length behind the vehicle. Intermediate values are in-between.

Additionally, this property can be used to disable powered wagons of this type, although that is usually done with callback 10 instead (which has the same meaning as prop. 22, but is more flexible).

Range Effect type
00..0F Use the default effect type, but reposition it. For engines this is defined via property 19, wagons have no default effect.
10..1F Steam puffs
20..2F Diesel fumes
30..3F Electric sparks
40 Disable visual effect
80+10..80+3F Same as above, but disable wagon power
80+40 Disable both visual effect and wagon power


For example, 28 would make the wagon powered and emit diesel fumes, but 80+28 = A8 would only emit the diesel fumes without adding power.

Miscellaneous flags (27)

This is a bit mask, with the following bits:

Bit Value Meaning
0 1 Vehicle tilts in curves, and thus gets speed bonus
1 2 Uses two company colors
2 4 Vehicle is a multiple unit (DMU/EMU), for colour selection
3 8 Vehicle can be flipped around in the depot (OpenTTD r21966+)

The tilting speed bonus only applies if all vehicles in the train have this bit set. In TTDPatch it requires the "curves" switch to be on. For realistic curves, it gives the train two free curving pieces with no speed decrease, and for other settings, it increases the curves setting by one (0->1, 1->2, 2->2). In OpenTTD, the curve speed limit increases by 20% if 'realistic' acceleration is enabled, else there is no effect.

When you enable flipping of a vehicle in a depot you must make sure that the graphics are correctly aligned when flipped as well. Especially in the case of shortened vehicles. For multiheaded or articulated vehicles the flipping bit has no effect; these vehicles are never to be flipped around in the depot.

In versions of OpenTTD before r21966 (~1.1.0-beta5) all non-multiheaded/non-articulated vehicles would be able to flip around in the depot. As such this disables a "feature" in OpenTTD, but often it makes no sense to flip vehicles around (symetric vehicles) or the graphics are wrong (most shortened vehicles), and thus only enabling this when the NewGRF developer says it is possible is better.

Cargo classes (28, 29)

To make vehicle sets more compatible with future new cargo definitions, these two properties allow vehicles to define what type of cargo they should be refittable to. A wagon will be refittable to all cargo types that match the classes set in prop. 28 except for the ones that match the classes set in prop. 29. In addition, afterwards those cargo types listed in prop. 1D will be toggled. In terms of logic, it is

Refit list = (cargos from prop. 28 AND NOT cargos from prop. 29) XOR cargos from prop. 1D

This means, if a cargo type is in the list because it matches prop. 28 but not prop 29, having the respective bit set in prop. 1D will disable it again. Conversely, if the cargo type is not in the list, the bit in prop. 1D will add it. This way, if props. 28/29 are unset, prop. 1D will retain the original meaning, but it is still able to selectively add or remove certain cargo types even if props. 28/29 are used.

As a consequence, you have both full control over the cargo types that you know of (using prop. 1D), and those you don't know of yet (using props. 28/29). Leave the bits for cargos that you don't know of unset in prop. 1D, and set/clear the bits for known cargos to add/remove them from the list as appropriate.

The class list is a bit mask. See the action0 cargos page for bits and classes defined so far.

Take a look at Action0 for cargos for the classes defined so far.

Note that cargo types may belong to several classes. This is the reason for making two properties, an additive and a subtractive one, because this way a vehicle can be specified to be refittable to, for example, all express cargo that does not require refrigeration (i.e., from the default cargos, no food). For the cargo types added in this way, the vehicle will probably have no specific graphics (in action 3) to show the cargo load.  In this case, the default will be used, which should therefore be sufficiently generic-looking if possible. However, using vehicle variable 47 you can at least select the graphics most appropriate for the cargo type's class. About the interaction with other properties take a look at the summary page about  vehicle refitting.

Long format introduction date (2A)

Set the vehicle introduction date, in days since the year 0. This takes account of leap years; dividable by 4, but not 100 unless 400. A start date of 1920-01-01 is obtained with a value of 701265 (51 B3 0A 00). This property must be set after property 00 to take effect. In TTDPatch, dates after 2044 will be limited to 2044.

Example

Below is an example of what a real Action 0 pseudo-sprite could look like for a train engine.

(A basic version)

10 * 14  00 00 03 01 02 09 C0 00 0B D8 0E 12 FD
Bytes Meaning
10 <Sprite-number>
14 <Length>: of the action in bytes; start counting at 0 (<action>)
00 <action>: sets this pseudo-sprite to function as action 0
00 <Feature>: In this case Train
03 <Num-props>: 3 Properties to change
01 <Num-info>: 1 vehicle ID to make changes to
02 <ids...>: vehcile ID (02 - Ploddyphut Choo-Choo)
Properties
09 <Speed>
C0 00 <Value>: Value for Speed (192 Km/h)
0B <Power>
D8 0E <value>: value for Power (3800 HP)
12 <Sprite ID>
FD <value>: FD for new graphics

Since nfo version 7, so-called "escape sequences" have been introduced in an attempt to offer a more human-readable form.

Below is the same example as above, with escape sequences being used:

-1 * 0 00 00 \b3 01 \b*2 // \b<number of props to change> \b*<vehicle ID>

       09 \w192 // value for speed (192 Km/h)

       0B \w3800 // value for power (3800 hp)

       12 FD // use new graphics